Recent content by ronl

  1. R

    Osmolator Nano Stopped Working

    Thanks Roger. So do you just need the little controller cube, which looks like it will include the gray cord with float valve on the end and the black cord with the wire connectors on the end? No need for the pump and pump cord or power supply/power cord? Please remind me of the address to send...
  2. R

    Osmolator Nano Stopped Working

    I meant to type “prior” communications, not “rigor”.
  3. R

    Osmolator Nano Stopped Working

    Thanks Roger. I did some digging to find some rigor communications. When I had an issue with my first Nano a little over 4 years ago, I mailed the controller and pump to you on 9/20/2016 for diagnosis. I don’t remember exactly what you said, but I thought you had mentioned something similar...
  4. R

    Osmolator Nano Stopped Working

    Roger, I am running into the same issue again with my Osmolator Nano. It worked great again for a couple months after replacing the pump in December. But today I noticed the sump water level was low, so I unplugged the Nano for a minute and plugged it back in and the pump ran for about 15-20...
  5. R

    Osmolator Nano Stopped Working

    New pump seems to have solved the problem. Thanks for the diagnosis Roger.
  6. R

    Osmolator Nano Stopped Working

    I don’t know of any to borrow, so I ordered a new pump today. I’ll provide an update once I receive it to confirm if that was the problem.
  7. R

    Osmolator Nano Stopped Working

    Thanks. Is it the same replacement pump (5000.02) for the 3152 and 3155?
  8. R

    Osmolator Nano Stopped Working

    Roger, My Osmolator Nano 3152 stopped working recently. It's 4 years old and replaced one that died after 3 1/2 years. I cleaned the float sensor and it moves freely. No siphon issues or run time issues or air in the pump. When I unplug it for a minute and plug it back in, it pumps water...
  9. R

    Jebao DCP return pump?

    fishbox, I've been considering a DCP-4000. Do you know if a 1" threaded female adaptor would screw on to the output of the pump like in the attached picture?
  10. R

    Osmolator Nano 3152 Stopped Working

    Thanks Roger. I put everything in the mail today. I hope it's just a problem with the pump because this has been a great trouble free ATO for me for 3 1/2 years. Thanks, Ron
  11. R

    Osmolator Nano 3152 Stopped Working

    Roger, My Osmolator Nano 3152, which has worked flawlessly for 3 1/2 years suddenly stopped working. I noticed the water level seemed low, so I checked to see if the float sensor was stuck in the up position, but it was all the way down and moved freely. Top off reservoir had plenty of water...
  12. R

    Help! Trying to catch bully six line wrasse!

    Right, since lights were out for a couple of hours, the other fish were all in their nighttime spots and had no idea the 6-line was being evicted. It only works though if the 6-line sleeps in an easily removed rock. If he slept in a lower rock, I would have had to resort to other methods. Just...
  13. R

    24x24x16 or 24x24x14

    Ugh!
  14. R

    24x24x16 or 24x24x14

    Let's see if I can rotate that pic.
  15. R

    24x24x16 or 24x24x14

    Not sure if it helps, but the tank pictured below is 24x24x14. I was also deciding between 16" ans 14". Went with 14" because I wanted a more shallow appearance. I don't know yet if I will regret not going with 16" because I am still just leak testing with freshwater. Once running, the water...
Top