Recent content by zenzence

  1. zenzence


    You really want see that your tank cycled...looking for rise in ammonium and nitrites then a drop back to zero and you want to be able to reproduce these results..this ensured it's cycled....check out articles online *********.com and bulkreef supply on youtube is wealth of knowledge..has tons...
  2. zenzence

    Any issue splitting flexible return line for reactor

    Thanks nam...I only run my return at 70% so I got some wiggle room.... Sent from my SM-G986U using Tapatalk
  3. zenzence

    Any issue splitting flexible return line for reactor

    Hey everyone...wanted add a reactor to my tank. My return is plumbed with flexible 3/4 inch line. Is there any problem adding a "T" and a ball valve and adding a reactor??? Thanks Chad Sent from my SM-G986U using Tapatalk
  4. zenzence

    Magnesium Off Charts

    Thanks Robby G i went looked at BRS calcium carbonate and sure enough there Is some magnesium 160 ppm ...Didn't think the calcium supp would have mag... Sent from my SM-G986U using Tapatalk
  5. zenzence

    Does Red Sea NO3:PO4-X work without skimmer?

    Nopox has proven to work extremely well in my experience but yes gotta have that skimmer working overtime !!! Sent from my SM-G986U using Tapatalk
  6. zenzence

    Magnesium Off Charts

    Hey everyone ...I am using Reef Crystals and my mag is off the charts I have used red sea magnesium test kit and nyos. Red sea is about 1750 and nyos was off chart!?!? I do not dose magnesium just standard 2 part from BRS and nopox. Any thoughts Thanks Sent from my SM-G986U using Tapatalk
  7. zenzence

    Cured Mold Resistant Silicon

    It took me 20 min replaced silicon .... not big deal just curious everyone saying NO mold resistant silicon but I had no ill effects. Better safe than sorry... Thanks for everyone
  8. zenzence

    How Important is Green and Red Light Spectrum

    Hello, So using LED we have so many options..... At 14K we are using mainly UV, Violet and Royal Blue. With a adjustable LED light seems Green, Red and White are kinda being left out.... If you have a Prime HD light I am using only 30 watts at 14k at 80% ....This is because from what i read...
  9. zenzence

    Cured Mold Resistant Silicon

    Well....nothing has died and its been 3 weeks clowns and corals doing fine...I may just replace it not a lot of work really ..drain tank below overflow ...razor blade off silicon with out getting it into water.. then put new overflow on..
  10. zenzence

    Cured Mold Resistant Silicon

    Sure this has been asked but cant get search engine work even after I logged in. I made a rookie mistake and used mold resistant silicon to attach my overflow box to my tank. I waited 48 hours to cure. I see lot post how bad this is...My fish are fine my corals are doing okay. Long term...
  11. zenzence

    Skimmer problem Bubble Magus 3.5 Cone

    Updates I have a bubble magus 3.5 as well with a bubble trap installed after skimmer. Still ALOT of micro bubbles and its been well over 3 weeks.
  12. zenzence

    Pics of Closed Loop Refugium

    Ok so here are a couple pics of refugium. I have had this refugium running non stop since 2009. I got it from I believe his name was jeff over at The refugium is extremely well built and comes complete with quick disconnect connections. The quick connects are extremely important...
  13. zenzence

    Pics of Closed Loop Refugium

    Update Update Well it has been a few year and my closed loop refugium has been really great. The only problem I have is some red bubble algea growing in tube that feeds refugium. I clean that out once a month and no problems.
  14. zenzence

    led info please

    check out