I want to thank skipper for bringing the Japanese tank thread back up. If it wasn't for that - I probably would not have the information I have now.
Also, a special thanks goes out to Yasuhiro for taking the time and answering my questions! Also the owner and keeper of http://www.reefaqua.com (Blue Lagoon) Thanks alot!
For anyone not up to date on this, let me give a brief explanation. There was some debate on what the Japanese used for lighting and the specifics on how they did it. I decided to do some research and came to my own conclusions. However, I wanted to know more - so I dug deeper and found what I was looking for. Thanks to a fellow reefkeeper in Japan - he has given us an insight into their lighting techniques. Below is an excerpt of his diary that he put up for me. I hope everyone gets a chance to read it. I beleive it will change the way we look at lighting from now and into the future. At least, I know I will. Well here it is!
2002.06.05
Since there was a question from a foreign reef keeper today, I explain the lighting
system of my tank.
Lower photograph is a simple explanation of the lighting system of my tank.
The lighting currently used for my tank is as follows.
3x 250watt Metal Halide Lamp(doubled ended bulb) with magnetic ballast,it's Kelvin rating is 20K-25K,made in Japanese lump maker. This light looks pale blue. This commercial reflector is used for the lighting of the outer wall of a building and magnetic ballast is standard type.
2x 250watt Metal Halide Lamps with magnetic ballast, it's Kelvin rating is 14K. This bulb was made in German. Light of this bulb looks pale,too.
3x 150watt Metal Halide Lamps with electrical ballast. This bulb is a screw formula type. A lens is a wide angle and has become half reflective mirror type. A mirror is designed to pass only required wavelength, UV and infrared rays also emit it back.
I use 2x blue light type and 1x red light type.
50watt & 75watt standard hallogen lamps made by 'USIO' are also used. Because of follows,with the lighting of only high kelvin rating metal halide lamps a tank looks blue too much and slight UV is required to get rich color of coral.
When metal hallide lamps tuned off at night, I use standard (not VHO) fluorescent light.
I used two type of fluorescent light bulbs, RB37 and BB450.
RB37 is fluorescent light which is 650nm-690nm peak enhanced and its light looks purple.
BB450 is fluorescent light which is 420nm-470nm peak enhanced amd its light looks deep blue.
There are two formula of bulb, straight type 20w-40w and ball type 27w.
I use 2x BB450 20watt,2x RB37 20watt,3x BB450 27w(pendant type reflector) and 1x RB37 27watt bulb.
Left Side of Tank
Right Side of Tank
Electrical ballast for 150watt metal hallide bulb
magnetic ballast for 250watt metal hallide bulb
250watt doubled ended bulb made in German (10K),150watt screw type metal hallide bulb
made in Japan and USIO's hallogen red bulb.
The ceiling of the room with a tank is a sun parlor, and, in a certain grade, natural sun light shines during a half of day. When light is strong in summer, it adjusts using a shade
The way to get rich colored coral which I concider is as follows,
Use two or more metal halide lamps with the high kelvin rating.
Keep the level of PO4 and NO3 low.
Irradiate moderate quantity of UV according to the depth which the coral inhabited.
Red color metal hallide lamps make deep color of corals such as Seriatopora hystrix,Stylophora pistillata,Pocillopora damicornis and some kinds of Acropora. However, as for red MH lamps, influence changes greatly with inhabited
These are simple explanation of my reef tank lighting.
Again, a special thanks goes out to Yasuhiro for taking the time to explain his lighting. Alot of you I am sure will have questions. I have an email to Yasuhiro asking for a little more information and specifics on a few of his lights, the red halogen and red metal halides, the screw type metal halide as well. I am sure he will get back with me.
I hope everyone will find use of this thread and it won't end up at the bottom for at least a little bit
I for one am going to find out as much nfo on these lights and where to purchase them. As I figured, the Japanese are a little more advanced and have a different concept in reefing. I will explain this later.
ENJOY!
Kris
Also, a special thanks goes out to Yasuhiro for taking the time and answering my questions! Also the owner and keeper of http://www.reefaqua.com (Blue Lagoon) Thanks alot!
For anyone not up to date on this, let me give a brief explanation. There was some debate on what the Japanese used for lighting and the specifics on how they did it. I decided to do some research and came to my own conclusions. However, I wanted to know more - so I dug deeper and found what I was looking for. Thanks to a fellow reefkeeper in Japan - he has given us an insight into their lighting techniques. Below is an excerpt of his diary that he put up for me. I hope everyone gets a chance to read it. I beleive it will change the way we look at lighting from now and into the future. At least, I know I will. Well here it is!
2002.06.05
Since there was a question from a foreign reef keeper today, I explain the lighting
system of my tank.
Lower photograph is a simple explanation of the lighting system of my tank.

The lighting currently used for my tank is as follows.
3x 250watt Metal Halide Lamp(doubled ended bulb) with magnetic ballast,it's Kelvin rating is 20K-25K,made in Japanese lump maker. This light looks pale blue. This commercial reflector is used for the lighting of the outer wall of a building and magnetic ballast is standard type.
2x 250watt Metal Halide Lamps with magnetic ballast, it's Kelvin rating is 14K. This bulb was made in German. Light of this bulb looks pale,too.
3x 150watt Metal Halide Lamps with electrical ballast. This bulb is a screw formula type. A lens is a wide angle and has become half reflective mirror type. A mirror is designed to pass only required wavelength, UV and infrared rays also emit it back.
I use 2x blue light type and 1x red light type.
50watt & 75watt standard hallogen lamps made by 'USIO' are also used. Because of follows,with the lighting of only high kelvin rating metal halide lamps a tank looks blue too much and slight UV is required to get rich color of coral.
When metal hallide lamps tuned off at night, I use standard (not VHO) fluorescent light.
I used two type of fluorescent light bulbs, RB37 and BB450.
RB37 is fluorescent light which is 650nm-690nm peak enhanced and its light looks purple.
BB450 is fluorescent light which is 420nm-470nm peak enhanced amd its light looks deep blue.
There are two formula of bulb, straight type 20w-40w and ball type 27w.
I use 2x BB450 20watt,2x RB37 20watt,3x BB450 27w(pendant type reflector) and 1x RB37 27watt bulb.
Left Side of Tank

Right Side of Tank

Electrical ballast for 150watt metal hallide bulb

magnetic ballast for 250watt metal hallide bulb

250watt doubled ended bulb made in German (10K),150watt screw type metal hallide bulb
made in Japan and USIO's hallogen red bulb.

The ceiling of the room with a tank is a sun parlor, and, in a certain grade, natural sun light shines during a half of day. When light is strong in summer, it adjusts using a shade


The way to get rich colored coral which I concider is as follows,
Use two or more metal halide lamps with the high kelvin rating.
Keep the level of PO4 and NO3 low.
Irradiate moderate quantity of UV according to the depth which the coral inhabited.
Red color metal hallide lamps make deep color of corals such as Seriatopora hystrix,Stylophora pistillata,Pocillopora damicornis and some kinds of Acropora. However, as for red MH lamps, influence changes greatly with inhabited
These are simple explanation of my reef tank lighting.
Again, a special thanks goes out to Yasuhiro for taking the time to explain his lighting. Alot of you I am sure will have questions. I have an email to Yasuhiro asking for a little more information and specifics on a few of his lights, the red halogen and red metal halides, the screw type metal halide as well. I am sure he will get back with me.
I hope everyone will find use of this thread and it won't end up at the bottom for at least a little bit

ENJOY!
Kris