snodine
Premium Member
Anyone using Danner Mag-Drive Supreme 9.5 pump? My set up is fairly simple - 130 gallon display tank, 55 gallon sump next to the 130, about a 40 inch vertical rise out of the sump, about 124 inch horizontal run and then another 24 inch drop back into the display tank. Not planning any ball valves in the system but 7 unions. There will be 4 - 45 degree bends (2 pairs of 45s making 2 90 degree bends).
I am using a CPR CS90 HOB overflow which is rated at 600 gallons per hour and the Mag 9.5 is rated at 950 GPH.
The RC head loss calculator gives a value of total losses at 3.88 feet of head pressure, or 1.68 PSI. with a flow rate of 821 GPH using 1.5 inch PVC.
Any comments would be appreciated.
Thanks,
Steve
I am using a CPR CS90 HOB overflow which is rated at 600 gallons per hour and the Mag 9.5 is rated at 950 GPH.
The RC head loss calculator gives a value of total losses at 3.88 feet of head pressure, or 1.68 PSI. with a flow rate of 821 GPH using 1.5 inch PVC.
Any comments would be appreciated.
Thanks,
Steve