My friend purchased 3 extra EB8's for his existing apex. When he connected one of the new bars he got some sporatic issues. Like his keypad would not respond, and he lost web access. So he tried a few things and he was able to access through Iphone app. But not pc's(computers) so I went up to his house to work on it. Hostname was off, repaired that, and basically restored all to defaults. I finally was able to log in but I got a 404 error. When I had this with mine a firmware Update and webpage update repaired it.
As I was updating firmware it stopped at 8 of something and froze then lost connection all this was hardwired. I Called neptune and they have told me that the programming failed and that it was corrupted and that it defaults to bootloader.
Now I am in Bootloader but It still will not program in my place where I have sucessfully updated and have mine connected. It times out, i've let it run up to 95 attempts. I have left the network address as apex and have changed it to the Ip address as well but no luck. Also the green light on the network port goes green when it comes on but after a minute or 2 goes off then back again and both the eb8 and the base module are blinking orange and the display is blank. Please help Thanks.
As I was updating firmware it stopped at 8 of something and froze then lost connection all this was hardwired. I Called neptune and they have told me that the programming failed and that it was corrupted and that it defaults to bootloader.
Now I am in Bootloader but It still will not program in my place where I have sucessfully updated and have mine connected. It times out, i've let it run up to 95 attempts. I have left the network address as apex and have changed it to the Ip address as well but no luck. Also the green light on the network port goes green when it comes on but after a minute or 2 goes off then back again and both the eb8 and the base module are blinking orange and the display is blank. Please help Thanks.