I recently bought the above and got some
questions to ask regarding the Calibration and
Measurement. ( had read about this :
http://reefkeeping.com/issues/2005-04/rhf/index.htm
an review done by you but somehow still encounter this..
Firstly, under no 4. of the instruction, "Put the
probe tip into the 100 Ca+ Calibration Fluid. Wait
until the number 100 begins to flash on the display on
a regular basis (4ââ"šÂ¬Ã¢â‚¬Å“5 steady flashes or longer is
advised). This may take a minute or two. Then press
the Enter button to register the 100ppm Ca+
calibration. The LCD should display the word "good."
But for my case it indicate "Err" , which is error i
guess. Why is that so?
Is it because i had add the probe electrolyte fluid to
much, i add to till about half inch below the black
cap. If so how?
Secondly, is there a clear plastic cap that must be
removed from the tip of the Calcium probe so that the
values can be measured? this is what i read from manufacturer
website under FAQ? but it does not say is calcium probe /ph probe that is with the cap, it seems like there is no cap on the calcium probe.
Thanks in advance. Hope to receive a flavourable help
asap.
Lawrence Steve
questions to ask regarding the Calibration and
Measurement. ( had read about this :
http://reefkeeping.com/issues/2005-04/rhf/index.htm
an review done by you but somehow still encounter this..
Firstly, under no 4. of the instruction, "Put the
probe tip into the 100 Ca+ Calibration Fluid. Wait
until the number 100 begins to flash on the display on
a regular basis (4ââ"šÂ¬Ã¢â‚¬Å“5 steady flashes or longer is
advised). This may take a minute or two. Then press
the Enter button to register the 100ppm Ca+
calibration. The LCD should display the word "good."
But for my case it indicate "Err" , which is error i
guess. Why is that so?
Is it because i had add the probe electrolyte fluid to
much, i add to till about half inch below the black
cap. If so how?
Secondly, is there a clear plastic cap that must be
removed from the tip of the Calcium probe so that the
values can be measured? this is what i read from manufacturer
website under FAQ? but it does not say is calcium probe /ph probe that is with the cap, it seems like there is no cap on the calcium probe.
Thanks in advance. Hope to receive a flavourable help
asap.
Lawrence Steve
