Cleaning out the Garage

Status
Not open for further replies.

pcfish

Premium Member
Water Blaster HY-5000w Pump this was my spare used a few times when I cleaned my main pump had this as a spare
$150
Max Water Flow:1300gph
Max Head:12ft
Voltage: 120v/60Hz
Wattage: 60w
Efficiency:95%
Dimensions (L x W x H):9in x 4½in x 8.3in

Hard Plumb / Hose Barb Connections
Inlet Size:1¼in inlet
Outlet Size: 1in outlet

I used this for mixing water only. I bought this for a tank I had in the past.
$100
Water Blaster HY-3000w Pump
Max Water Flow:750gph
Max Head:9ftVoltage: 120v/60Hz
Wattage: 37w
Efficiency:92%
Dimensions (L x W x H):8¼in x 4¼in x 7.9in

Hard Plumb / Hose Barb Connections
Inlet Size:1in inlet
Outlet Size: ¾in outlet

300W Eheim Jager Aquarium Heater x2 $20 each
 

pcfish

Premium Member
Pictures
dbbf543681bedd23c16a1c8280d77151.jpg
0db8b9d2a705da5c16c2d594619313ee.jpg
6f880bfda98672d0b79580fae81d8307.jpg


Sent from my SM-G975U using Tapatalk
 

pcfish

Premium Member
Water Blaster HY-3000w Pump Sold

Water Blaster pumps can be run in external or internal applications
 
Last edited:

marioensf

New member
Hi Pedro!

Do you know by any chance if those pumps, the motor block is made by Askoll?
I have a friend looking for a replacement motor block for a Red Dragon pump and the images look very similar to the Laguna/Askoll motor block.

Thx
 

pcfish

Premium Member
Heaters sold.
Hy-5000 available.

Mario, I had to buy the entire Laguna 1350 for the skimmer I got from you. The pump stopped working.
I downsized so sold the skimmer.
Amazon sells the pumps. I just used the motor block from the Laguna 1350 and put the red dragon impeller and cover


Sent from my SM-G975U using Tapatalk
 
Last edited:

pcfish

Premium Member
Hi Pedro!

Do you know by any chance if those pumps, the motor block is made by Askoll?
I have a friend looking for a replacement motor block for a Red Dragon pump and the images look very similar to the Laguna/Askoll motor block.

Thx

Mario this is the one I ordered that worked for me. I had to use the screw from my pump. The holes on the motor block are a little smaller so I had to make them a little bigger but works great.

https://www.amazon.com/dp/B0079WZH7S?ref=ppx_yo2_dt_b_product_details&th=1
 
Status
Not open for further replies.
Top