landragon
Premium Member
Hey all. I am finally done with moving things over from the 20 into the 90, so I will have the 20 setup ready for sale this weekend. I am asking $175. Firm. I will trade for the right things but I want some cash in the deal.
The setup consists of a AGA 20H, drilled twice with 1" bulkheads. It is currently setup to be a low turnover for the sump with one drain one return via 3/4 locline, as I had a SEIO 820 in it. It can have both bulkheads turned into drains at no extra cost, other than a new drain hose,or you can supply your own. There is also a 10 gallon AGA sump with no partitions. Partitions can be put in at cost of materials. Running the setup will be a rio 1400, and a MJ900 modded stream style. There is a 150 watt AGA Visitherm heater. All plumbing and drains included.For the hood I built a plywood canopy with a piano hinge allowing it to open almost half way front to back. there is a cut out in the rear for accesories. Inside is a current 50/50 65 watt PC bulb in a ahsuplly reflector. Also a 15w Zoo Med 50/50 and a 15w URI ultra actinic. A 3" fan comes on with the PC. The system is leak and crack free and should have minimal scratches. It has run succesfully for 6 months.One 8 outlet power strip is also included, and this is not a surge protector. The 20H sits on two pieces on top of each other of MDF. This is on a 10 gallon iron stand. The 10 sump sits under. One filter sock will be included. I have found this to quiet it sufficiently.
I will accept local pick up or I will deliver for $20 extra. Delivery would have to be sun-thurs after 6 pm. This fee will get the system delivered 25 miles from The Pinellas/Pasco border at US 19 . Please have an iced tea and a good story when I get there.
Pics will follow within 2 hours.
EDIT : the pic of the bicolor hammer in my avatar is from this tank with the setup described.
The setup consists of a AGA 20H, drilled twice with 1" bulkheads. It is currently setup to be a low turnover for the sump with one drain one return via 3/4 locline, as I had a SEIO 820 in it. It can have both bulkheads turned into drains at no extra cost, other than a new drain hose,or you can supply your own. There is also a 10 gallon AGA sump with no partitions. Partitions can be put in at cost of materials. Running the setup will be a rio 1400, and a MJ900 modded stream style. There is a 150 watt AGA Visitherm heater. All plumbing and drains included.For the hood I built a plywood canopy with a piano hinge allowing it to open almost half way front to back. there is a cut out in the rear for accesories. Inside is a current 50/50 65 watt PC bulb in a ahsuplly reflector. Also a 15w Zoo Med 50/50 and a 15w URI ultra actinic. A 3" fan comes on with the PC. The system is leak and crack free and should have minimal scratches. It has run succesfully for 6 months.One 8 outlet power strip is also included, and this is not a surge protector. The 20H sits on two pieces on top of each other of MDF. This is on a 10 gallon iron stand. The 10 sump sits under. One filter sock will be included. I have found this to quiet it sufficiently.
I will accept local pick up or I will deliver for $20 extra. Delivery would have to be sun-thurs after 6 pm. This fee will get the system delivered 25 miles from The Pinellas/Pasco border at US 19 . Please have an iced tea and a good story when I get there.
Pics will follow within 2 hours.
EDIT : the pic of the bicolor hammer in my avatar is from this tank with the setup described.