ReefNAZOut
In Memoriam
Is this stuff still good to use?
Dead Sea Works Mag Chloride hexahydrate still good to use?
- Thread starter ReefNAZOut
- Start date
I have no reason to think it has changed, and many folks use it. I do, but have a bag that I have been using for years. 
ReefNAZOut
In Memoriam
randy, I found this stuff at a local wholesaler will you check out these specs and if you would consider it a complete impurity profile?
Industrial grade magnesium chloride flakes produced from
the Great Salt Lake in Utah by industry standard solar
evaporation technology. The product is then treated to
remove sulfates, filtered to remove impurities, flaked, quality control tested and packaged.
Typical Analysis. Typical/ Range
Magnesium Chloride MgCl2 (%) 47.0/ 46.2 â€"œ 49.8
Potassium K (%) 0.2/ 0.1 â€"œ 0.6
Sodium Na (%) 0.4/ 0.2 â€"œ 0.7
Sulfate SO4 (%) 0.2/ 0.1 â€"œ 0.4
Calcium Ca (%) 0.2/ 0.1 â€"œ 0.5
Also I found this calcium chloride I would be obliged if you would see these specs and tell me what you think.
high grade / low grade
CaCl2 77% minimum / 77% Minimum
Magnesium 0.1% / 0.01%
Sodium 1% / 0.75%
Potassium 0.5% / 0.5%
Fluoride <10 mg/kg / 20 mg/kg
Sulfate <0.75% / -
Bromide <30* / 300-400 mg/kg
Arsenic <1 mg/kg / <1 mg/kg
Lead <5 mg/kg / <5 mg/kg
Iron <20 mg/kg / 25 mg/kg
Heavy Metals (as Lead) <20 mg/kg / <20 mg/kg
Industrial grade magnesium chloride flakes produced from
the Great Salt Lake in Utah by industry standard solar
evaporation technology. The product is then treated to
remove sulfates, filtered to remove impurities, flaked, quality control tested and packaged.
Typical Analysis. Typical/ Range
Magnesium Chloride MgCl2 (%) 47.0/ 46.2 â€"œ 49.8
Potassium K (%) 0.2/ 0.1 â€"œ 0.6
Sodium Na (%) 0.4/ 0.2 â€"œ 0.7
Sulfate SO4 (%) 0.2/ 0.1 â€"œ 0.4
Calcium Ca (%) 0.2/ 0.1 â€"œ 0.5
Also I found this calcium chloride I would be obliged if you would see these specs and tell me what you think.
high grade / low grade
CaCl2 77% minimum / 77% Minimum
Magnesium 0.1% / 0.01%
Sodium 1% / 0.75%
Potassium 0.5% / 0.5%
Fluoride <10 mg/kg / 20 mg/kg
Sulfate <0.75% / -
Bromide <30* / 300-400 mg/kg
Arsenic <1 mg/kg / <1 mg/kg
Lead <5 mg/kg / <5 mg/kg
Iron <20 mg/kg / 25 mg/kg
Heavy Metals (as Lead) <20 mg/kg / <20 mg/kg
The mag chloride one is not adequate to know. Ammonia especially is a concern, but the profile that we saw to say the MAG flake is OK had lots and lots of chemicals analyzed.
Same for the Dowflake calcium chloride, except I ran those studies myself.
That said, nothing in any of them looks to be a particular problem.
Same for the Dowflake calcium chloride, except I ran those studies myself.
That said, nothing in any of them looks to be a particular problem.
ReefNAZOut
In Memoriam
so these are not complete analysis of impurities? i just spoke with the guy for the calcium chloride also he said he had some other analysis of impurites like metals but they were all less than 1ppm he also said salt manufacturers were using their product, would you trust it?
Last edited:
No, this is a more complete analysis:
http://www.bostonreefers.org/forums/showthread.php?t=3568
Trace Element Content of Dead Sea Works
Magnesium Chloride
Element Typical(ppm) Maximum(ppm)
Mg 115000(11.5%) 125000 (12.5%)
Ca 7000 8000
Br 5000 8000
K 2500 3500
S(SO42-) 180 200
Sr 120 150
B 20 30
Li 10 15
N* 4 5
Si 9 15
Fe 3 10
P 2 3
Mn 2 3
Al 1 3
Ba 1 2
Co <1
Cr <1
Cu <1
F <1
Mo <1
Ni <1
Se <1
V <1
Zn <1
As <0.1
Hg <0.1
Pb <0.1
Cd <0.01
I n.a
Rb n.a
http://www.bostonreefers.org/forums/showthread.php?t=3568
Trace Element Content of Dead Sea Works
Magnesium Chloride
Element Typical(ppm) Maximum(ppm)
Mg 115000(11.5%) 125000 (12.5%)
Ca 7000 8000
Br 5000 8000
K 2500 3500
S(SO42-) 180 200
Sr 120 150
B 20 30
Li 10 15
N* 4 5
Si 9 15
Fe 3 10
P 2 3
Mn 2 3
Al 1 3
Ba 1 2
Co <1
Cr <1
Cu <1
F <1
Mo <1
Ni <1
Se <1
V <1
Zn <1
As <0.1
Hg <0.1
Pb <0.1
Cd <0.01
I n.a
Rb n.a
Similar threads
