Blugobi
New member
OK my tank is finally back up and running (almost two weeks) My LR has been curing for almost 13 days and the Ammonia has spiked and seems to be starting to back off. I started with 130lbs of premium Fiji Uncured rock and it appears to be lots of interesting "Stuff" not to mention all the sponges which I keep finding and removing. The pictures below ( sorry for quality..old camera) are after the final scrub, rinse and re-stack with out the MH on. Should be ready for some critters in a few weeks...Thanks to St.James for the "Starter sand" Here is my current set up:
90 gal Acrylic with corner over flow
40 gal sump with 15 lbs rubble rock bottom / 2x65PC
MR2 Skimmer 55Pcx
2x175 12k Sunburst (soon to be replaced)
4x95W VHO/Icecap
130 lbs LR
40 lbs Sand about 3/4 inch (Strictly for asthetics)
Dual Chambered CA reactor...(not hooked up yet)
And lots a room for Acro's!!!!!
Again sorry for the quality of the pictures.
GR
90 gal Acrylic with corner over flow
40 gal sump with 15 lbs rubble rock bottom / 2x65PC
MR2 Skimmer 55Pcx
2x175 12k Sunburst (soon to be replaced)
4x95W VHO/Icecap
130 lbs LR
40 lbs Sand about 3/4 inch (Strictly for asthetics)
Dual Chambered CA reactor...(not hooked up yet)
And lots a room for Acro's!!!!!
Again sorry for the quality of the pictures.
GR