hi everone i just installed a ets revolution 500/but it just fills the collection cup with water and never collects foam /i use the pump reccomended with the unit try too adjust the intake valve on the unit but nothing works /does anyone have this skimmer / ps it also leaks and the company is of no help
flooding skimmer
- Thread starter aiello
- Start date
<a href="http://photobucket.com" target="_blank"><img src="http://i45.photobucket.com/albums/f54/mta7/Picture135.jpg" border="0" alt="Image hosting by Photobucket"></a>Be sure the skimmer output gate valve is open all the way.Counter clockwise.Also water level at output should be no more than 1/2" submersed.
<a href="http://photobucket.com" target="_blank"><img src="http://i45.photobucket.com/albums/f54/mta7/Picture135.jpg" border="0" alt="Image hosting by Photobucket"></a>Be sure the skimmer output gate valve is open all the way.Counter clockwise.Also water level at output should be no more than 1/2" submersed.
mantisbaby
New member
Hey there, are you using stress coat slime in your waater changes or top off water? That over flowed my skimmer. Is there a way to adjust the height of your collection cup. Good luck
either your gate/output valve is not all the way open or your skimmer is sitting too far under the water level in your sump......
put something under your skimmer to raise it up out of the water, or lower the waterlevel in your sump, but make sure the gate valve is wide open first
put something under your skimmer to raise it up out of the water, or lower the waterlevel in your sump, but make sure the gate valve is wide open first
thanks for the replies /my skimmer is not in my sump its connected to the bulk head of the amiracle wet dry sump the water level is not very high /sorry im working on pictures but i know the gate is wide open /my skimmers water exit is even with the the entrance of the wet dry /is that a problem/ thanks for helping
Similar threads
