markster33139
New member
I believe it's on Com 1, I have sent another email requesting assistance, thank you
GHL Doser 2 Owners Club
- Thread starter bklynreef123
- Start date
AQD_ottawa
New member
please make sure you email info@ghlna.com
Boy oh boy, instructions a bit lacking ..... finally got the thing connected via USB, but cannot for the life of me get wifi or LAN to work. Seems like it ought to be simple, but it isn't. I follow the instructions in the manual, setting the IP address, submask, etc., hit save, let the unit sit for a few minutes. Then, with the Ethernet cable attached, I remove the USB cord ..... and nothing .... I get a 'communications error'. Any ideas?
Last edited:
AQD_ottawa
New member
Hi
On the new firmware release it has auto network detect. I would suggest connecting to USB and then installing the new firmware and running the new software
for further support please join the support forum at www.aquariumcomputer.com
all the best
Michael
On the new firmware release it has auto network detect. I would suggest connecting to USB and then installing the new firmware and running the new software
for further support please join the support forum at www.aquariumcomputer.com
all the best
Michael
Jerel
New member
Premium Aquatics will be your best bet for sourcing GHL products in North America. http://premiumaquatics.com/products/dosing-pump-peri-tubing.html
AQD_ottawa
New member
Yes the slave Doser 2 does not release until later this year for ProfiLux Users.
BUT 99% of the functionality of the stand alone doser 2 you get when you buy a profilux so the only thing you lose are the stepper motors for less than 1ml dosing.
BUT 99% of the functionality of the stand alone doser 2 you get when you buy a profilux so the only thing you lose are the stepper motors for less than 1ml dosing.
OK, thanks for the suggestion. My tolerance for frustration was exceeded so I just deeded to run it with a longer USB cable. I doubt I'll need to be fiddling with it though anything other than the computer anyhow.
ahh I see its just the stand alone doser 2 thats available? I'm a newbie regarding GHL equipment
Jerel
New member
Doctors Foster And Smith has stock of Tropic Marin Original Balling Salts, Part A, B, C and complete set.
I just set mine up and at this point can not figure out how to setup the wifi but it seems ok for now just loading the program via USB and then disconnecting USB and letting it run.
Are there any issues with not having it connected via USB all the time or is this just needed to change the program?
Are there any issues with not having it connected via USB all the time or is this just needed to change the program?
AQD_ottawa
New member
No problem at all, but do ask for tech help if you are not overly familiar with wifi set up, the support is there for all.
Also the new firmware comes with auto network find option, which is as close to plug and play wifi set up you will get.
Thanks. I just haven't had time to mess around with it. I tried to briefly set it up as an access point for the app but it kept giving me an error on the "key" (the part I set, right?) but I didn't give it much thought as I need to just get it dosing because I'm leaving town in a few days.
AQD_ottawa
New member
no probs. when you get back the support is here waiting 
Similar threads
