Hey guys, I'm setting up my IM 40 and I would like to run a UV sterilizer and a carbon and GFO reactors, I do not want to run the in sump reactor that IM makes so I am going to plumb it into my stand, which is a custom stand I built... my question is which pump should I get to be strong enough to handle this set up?? was thinking the Sicce 2 but if need be the Sicce 3 may be my answer.
so basically the pump would pump water down to a T where it would branch off to the UV sterilizer with a ball valve to control flow (250 gph, and the other side would lead to the reactors, which I believe are going to be around 150gph and then back up to return into the tank... here is a simple diagram of what I'm thinking
so basically the pump would pump water down to a T where it would branch off to the UV sterilizer with a ball valve to control flow (250 gph, and the other side would lead to the reactors, which I believe are going to be around 150gph and then back up to return into the tank... here is a simple diagram of what I'm thinking
