Hoping to connect a gyre to a profilux 4 controller.
I currently have the XF230 without controller &
currently waiting on delivery of the profilux 4.
programming will be new to me.
Correct me if im wrong on anything below or any suggestions be appreciated!
What ive gathered from other sites is that the profilux is 0/1-10v controllable & the Gyre is PWM 0-5V dimmable.
I also dont believe the ice cap controller is available in the EU & cant see anything else that may do it.
I do believe profilux have a similar interface below for LED's which may work also.
This product i believe will allow you to interface the gyre to the profilux
LT-704-5A 4CH CV 0-10V, 1-10V Dimming Driver
Input signal 0-10V, 1－10V, 10V PWM, resistor
Input voltage DC12V~DC24V
Max load current 5A ×4CH Max 20A
Max output power 240W/480W(12V/24V)
Dimming Range 0~100%
Dimming Curve - Linear
Output - PWM-CV
Dimming Protocol - 0-10V
working temperature -30℃~55℃
Dimension L175×W44×H30(mm)
So i will use a mean well LPV-60-24 PSU to power the pump via the LT-704-5A.
RG45 from profilux to the LT-704-5A for control of the gyre.
Output signal is then PWM to the gyre.
The gyre has 3 pins. I believe its 2 channel PWM with common grnd.
Im not sure of the cable colours and function of them (If anyone can help out?)
The LT-704-5A has also a soft start & stop.
I currently have the XF230 without controller &
currently waiting on delivery of the profilux 4.
programming will be new to me.
Correct me if im wrong on anything below or any suggestions be appreciated!
What ive gathered from other sites is that the profilux is 0/1-10v controllable & the Gyre is PWM 0-5V dimmable.
I also dont believe the ice cap controller is available in the EU & cant see anything else that may do it.
I do believe profilux have a similar interface below for LED's which may work also.
This product i believe will allow you to interface the gyre to the profilux
LT-704-5A 4CH CV 0-10V, 1-10V Dimming Driver
Input signal 0-10V, 1－10V, 10V PWM, resistor
Input voltage DC12V~DC24V
Max load current 5A ×4CH Max 20A
Max output power 240W/480W(12V/24V)
Dimming Range 0~100%
Dimming Curve - Linear
Output - PWM-CV
Dimming Protocol - 0-10V
working temperature -30℃~55℃
Dimension L175×W44×H30(mm)
So i will use a mean well LPV-60-24 PSU to power the pump via the LT-704-5A.
RG45 from profilux to the LT-704-5A for control of the gyre.
Output signal is then PWM to the gyre.
The gyre has 3 pins. I believe its 2 channel PWM with common grnd.
Im not sure of the cable colours and function of them (If anyone can help out?)
The LT-704-5A has also a soft start & stop.
