Kalk Reactor Problem

[Shadowramy]

I currently have a kalk reactor that is hooked up to a dosing pump which is hooked up to a 30 gallon rubbermaid tub - which the doser is hooked up to a ATO unit.

Problem is, when the sump water lowers it triggers the dosing pump to pull water from the rubbermaid tub to the kalk reactor which fills the sump. However, after the water level has been achieved, the doser stops but the kalk reactor continues to "drip" kalk in. I have tried raising the tubing above the kalk reactor then down to the sump but it still continues to drip - a check valve will not work since it is not back-syphining.

Any advise?

 

[kabal2]

what kind of kalk reactor do you have??, and how is set up??, did you try to raise the tubin that goes to the sump??, sorry for the million questions

 

[Shadowramy]

It a custom kalk reactor by Aquatic Systems. It is raised above the sump.

 

[titoreefs]

Try rising the efluent tubing from the reactor above the reactor and sump level.

Tito.