Locline experience?

Hanzo

New member
Ok, I need some advice based upon someone's experience with using locline.

I'm planning on having my closed loop and sump return lines feed into the tank through locline and locline nozzles. The locline will only be in the tank.

Proposed Plan (90 gal, 3'x2'x2')

Sump return
- Mag 9.5, estimated 700gph at 5 ft of head.
- 1" PVC --> 3/4" Locline valve --> 3/4 to 1/2" wye --> 2 sets locline sockets and nozzle.

Closed Loop (around top of tank)
- Mag 12, estimated 1100 gph at 2 ft of head.
- 1.5" PVC --> 1.5" to 1" Tee --> 1" PVC loop --> 4 1" Tees --> 1" to 3/4 reducer --> 3/4 to 1/2" wye --> 2 sets locline sockets and nozzle.

So......will I get decent flow with this proposed design? Or do I need to go to 1/4" or 3/4" locline instead of the 1/2"?

Any input would be welcomed.
 
Back
Top