The CLG-150-48B will work but it can't be dimmed by the apex. It is dimmed with a potentiometer. You would need a HLG-150-48B to be able to dim it with an apex.
The ELN-60-48D can be dimmed by the apex using the 0 - 10vdc variable output. There are four total. Apex only, the Apex lite would need a VDM module to do this.
The ELN-60-48P can also be dimmed by the Apex. It requires a PWM or 0 - 10vdc dimming signal.
I have a full blown Apex not the lite
so would the ELN-60-48D or ELN-60-48P be a better option would I have to buy a special module to run either with a regular apex
Personally I use 4 ELN-60-48D's with my apex. You just need to make up a cable or two to connect them. No special module needed. The outlets on the base module labeled V1/V2 and V3/V4 are the 0-10vdc outputs. You can either buy an ethernet cable and cut it in half or make one yourself if you have the crimpers. The unofficial users guide explains the pinouts.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
