OCEANBERRY - The DIY aquarium controller

andiserax

New member
Hello everyone!

This is Andrea from Italy.
I'm writing to show you my Raspberry OS based, DIY, aquarium controller system which is written in Python/C and Node-Red.

The system has been tested successfully for over 2 years on my reef aquarium.

20220925_154615.jpg

If you have any spare Raspberry board and you have some skills in DIY electronics and 3D printing this is the project for you!

THE ENTIRE PROJECT IS AVAILABLE IN DIGITAL FORMAT ON CULTS3D SITE FOR SUPPORTING ME IN THIS WORK. AT MOMENT WE DON'T PROVIDE ANY HARDWARE

Please visit
Oceanberry site to learn more!

You can easily control up to 12 power outlets, monitor power usage, monitor temperature and pH measurements and control the water level using non-contact sensors.
Then you can control remotely your aquarium using an elegant and powerful dashboard and receive push notification on your mobile if something is wrong on your tank.
Oceanberry is compact and easy to make.
You won’t have any electrical noise coming from your aquarium system (like pumps, skimmer and heater) since the sensors are electrically isolated).
Once built your controller, you need to attach ant Raspberry and burn the image on the SD card.
The controller is composed by:
  1. Raspberry Pi Zero W/ 2W / Pi2 / Pi3 / Pi4 / RPi Compute Module
  2. Aquarium Controller
  3. Tasmota flashed Power Bar (up to 4 x 3 modules = 12 outlets)
  4. Ph Probe sensor (optional)
  5. Temperature sensor
  6. Water Level sensors (optional)

Compatible with:
- Raspberry Pi Zero W
- Raspberry Pi2 Zero W
- Raspberry Pi 2
- Raspberry Pi 3b+
- Raspberry Pi 4
- Raspberry Compute module with WiFi capability.
- Banana Pi Zero M2 (very soon)
- Banana Pi M4 (very soon)
- Orange Pi PC (very soon)

Oceanberry makes your aquarium management easy and professional.

Key features:
- Compact design
- Affordable - about 130-150$ (compared to Neptune and GHL setups)
- Professional and reliable pH and Temperature readings (electrical isolated probes)
- up to 12 power outlets
- Modern dashboard (also for mobile and tablet)
- Push notifications
- Remote control
- Can work on existing wifi network or in AP mode.
- Import / export aquarium telemetry
- On board Buzzer alert
- Configurable alerts (water level, pH, temperature etc)
- Outlets scheduler
- Power consumption monitor (for enabled tasmota hardware)
- OLED display
- Temperature controlled internal super silent fan
- pH probe calibration tool

oceanberry_XR_XR.12.jpgoceanberry_XR_XR.16.jpgIMG_4416 (2).jpg20220409_152626-scaled.jpgbackup (1).pngCapture_settings-1024x453.pngCapture1-1024x477 (1).jpg
 
Back
Top