Hello all,
So here is the deal, I bought this 135 used from a guy on here. It is drilled 4 times in the back about 5 in below the top trim. Threw in my bulkeads, plumbed it, everything works and runs good. On the inside of the tank I have a 90 elbow pointing up with the strainer. Coming out of the back I have a T with a cap on top with a hole drilled through the top. Then it all heads to my sump...
How do I get rid of the toilet bowl sound of the water going down the elbow to the sump?
-I tried raising and lowing the strainer
-I tried adding some airline tubing into the return
-I tried adding airline tubing in the T
-HELP!
Thanks...
So here is the deal, I bought this 135 used from a guy on here. It is drilled 4 times in the back about 5 in below the top trim. Threw in my bulkeads, plumbed it, everything works and runs good. On the inside of the tank I have a 90 elbow pointing up with the strainer. Coming out of the back I have a T with a cap on top with a hole drilled through the top. Then it all heads to my sump...
How do I get rid of the toilet bowl sound of the water going down the elbow to the sump?
-I tried raising and lowing the strainer
-I tried adding some airline tubing into the return
-I tried adding airline tubing in the T
-HELP!
Thanks...