So I have my Tunzes set up via VDM module and they are running but not like how I would like them to be.
I would like them to alternate, as in one on and the other off. Since I didn't understand too much about the programming, I followed Ken's Reef programming but with two pumps instead of 4.
Programming for the varable speed outlets (via VDM module):
< Tunze_Left >
Set PM-Left
If Outlet Sunrise = ON Then AM-Left
If Outlet Daytime = ON Then Day-Lft
If Outlet Sunset = ON Then AM-Left
If Outlet FlushLeft = ON Then ON
< Tunze_Right >
Set PM-Right
If Outlet Sunrise = ON Then AM-Right
If Outlet Daytime = ON Then Day-Rt
If Outlet Sunset = ON Then AM-Right
If Outlet FlushRight = ON Then ON
Virtual Outlets:
< FlushLeft >
Set OFF
OSC 000:00/015:00/015:00 Then ON
< FlushRight >
Set OFF
OSC 015:00/015:00/000:00 Then ON
< Daytime >
If Sun 060/-060 Then ON
< Sunrise >
If Sun 000/000 Then ON
If Outlet Daytime = ON Then OFF
< Sunset >
If Sun 000/000 Then ON
If Outlet Daytime = ON Then OFF
Profile Setup are the same as Ken's.
I am not sure what to change so that the Tunze pumps will alternate on and off for 15mins at a time. A brief explaination on what should be done would be great. Giving me the code is ok but I would like to learn and understand it as well.
TIA
I would like them to alternate, as in one on and the other off. Since I didn't understand too much about the programming, I followed Ken's Reef programming but with two pumps instead of 4.
Programming for the varable speed outlets (via VDM module):
< Tunze_Left >
Set PM-Left
If Outlet Sunrise = ON Then AM-Left
If Outlet Daytime = ON Then Day-Lft
If Outlet Sunset = ON Then AM-Left
If Outlet FlushLeft = ON Then ON
< Tunze_Right >
Set PM-Right
If Outlet Sunrise = ON Then AM-Right
If Outlet Daytime = ON Then Day-Rt
If Outlet Sunset = ON Then AM-Right
If Outlet FlushRight = ON Then ON
Virtual Outlets:
< FlushLeft >
Set OFF
OSC 000:00/015:00/015:00 Then ON
< FlushRight >
Set OFF
OSC 015:00/015:00/000:00 Then ON
< Daytime >
If Sun 060/-060 Then ON
< Sunrise >
If Sun 000/000 Then ON
If Outlet Daytime = ON Then OFF
< Sunset >
If Sun 000/000 Then ON
If Outlet Daytime = ON Then OFF
Profile Setup are the same as Ken's.
I am not sure what to change so that the Tunze pumps will alternate on and off for 15mins at a time. A brief explaination on what should be done would be great. Giving me the code is ok but I would like to learn and understand it as well.
TIA