Stream Placement

[Achilles1882]

I am in the process of upgrading my 120 4x2x2 to my new 240 8x2x2. In the 240 I am wondering about possibilities for placement of the streams i have to best maximize current and flow. I have a 6080, 6000, and a 6100. The 6000 and 6100 are controlled by the 7095 multicontroller. All of the streams also have the super sweet magnet holders. In the both back corners are where the returns enter the tank from the top and then then overflows(2) are 1.5 foot from each end. The tunzes will be the main circulation in the tank. Any ideas or help would be greatly appreciated. Thanks so much! Thomas Sullivan

 

[rvitko]

I would probably upgrade the 6000 to a 6100 with part 7410.602. I would just place those in each back corner aimed to the front center and use Interval 2 mode. I would use the 6080 to take care of any low flow areas you find.

 

[rvitko]

I would probably upgrade the 6000 to a 6100 with part 7410.602. I would just place those in each back corner aimed to the front center and use Interval 2 mode. I would use the 6080 to take care of any low flow areas you find.