Tunze Osmolator w/ Kalk Reactor?

bureau13

New member
I've about decided on the Tunze Osmolator for my auto top-off. I also was thinking about using a Kalk Reactor/Stirrer device as part of the system...but will these two things work together? People seem to like using more-or-less constantly operating dosing pumps to feed the reactors, but the Osmolator has a small pump that runs periodically to refill the sump. Now, Tunze has a Kalk container thing, sort of like the stirrer with no stirrer, but it seems to me the actual reactors with either a stirrer or mixing pump would work better...if they'll work at all in this configuration.

Anyone doing anything like this?

jds
 
Maybe I should have clarified "this." I know a lot of people are dosing kalk one way or another.

Specifically what I'm asking is, can I use an auto top-off like the Tunze system, that does not use a continous low rate dosing pump, to feed a kalk reactor? Part 2 of the question, in this type of scenario, is the motor-driven stirrer or mixing pump present in a kalk reactor better than simple container of kalk mix that has the topoff water pumped through it, like the Tunze kalk dispenser.

jds
 
<a href=showthread.php?s=&postid=6923480#post6923480 target=_blank>Originally posted</a> by bureau13
Maybe I should have clarified "this." I know a lot of people are dosing kalk one way or another.

Specifically what I'm asking is, can I use an auto top-off like the Tunze system, that does not use a continous low rate dosing pump, to feed a kalk reactor? Part 2 of the question, in this type of scenario, is the motor-driven stirrer or mixing pump present in a kalk reactor better than simple container of kalk mix that has the topoff water pumped through it, like the Tunze kalk dispenser.

jds

ok, let me be more specific then:D

part 1
by looking at the search above link #19

Kalk Reactor W/ Auto Top Off ?

for topoff, I use an Tunze Osmolator, this thing is rock solid. the osmolator pumps water into the kalk reactor and automatically replaces the exact right amount of water.

that solve the "can it be done?"
second part continues or in increments, does it make a different?
why should it?
you still pumping the same amount of dosing into the tank.
people like to use dosing pumps not because of is easier or better, they mainly use it for safety reasons, aka not having a float valve get stuck, water is less likely, but with kalk is just a question of time.
tunze osmolator is "better" than a dosing pump in the sense that it doesn't have float valve, and has other safety features, so is safe and on top of that no "adjustments" are needed like with a dosing pump

now part 2

in short tunze dispenser vs kalk reactor
by looking at the search above link #5

Osmolator questions

rvitko, tunze rep, answer you
I really can't answer that, the Osmolator turns on every time the water level drops about 1mm and it dispenses usually a couple cups of water at a time. Certainly a mixing reactor will make more of a slurry than a solution so it will be stronger and I know people use the Osmolator with the MRC reactor, my opinion is kalk is not a good calcium supplement and I use it only to supplement my Calcium Reactor so the little Tunze unit suits me fine, I just want it to precipitate some phosphates and stabilize my pH and KH.

what that means is you can either use a reactor or the dispensor

tunze dispensor is good for a slight strength dosing, and helps with ph and a bit with phosphates.

kalk reactor has a stirrer that keeps the solution at optimum strength thus you get more solution into the tank

hope that help

sam
 
Back
Top