Vertex Illumina Club

[cali9dub]

Thanks for advice Kali, I think I'm going just use shell of powerbars an replace control board with something new..
You might be right as it's also old technology..

Sent from my SM-G973W using Tapatalk

Or maybe just turn the powerbar into a surge protector.

 

[bhazard1]

Wondering if someone can help me put a number to an Illumina sr200 I'm looking to sell. It's 72" long, 3 pads seem to have a diode that is not firing (hard to tell because the light is blinding). Replaced clock battery and plexiglass splash shield. Everything works and unit has been cleaned top to bottom (fans and fan raceway etc...). Is $600 too much/little??? Tore tank down otherwise I wouldn't sell.

Sent from my HD1910 using Tapatalk

 

[bhazard1]

Anyone know what these go for used? Or just send to the recycler?

 

[Vinny Kreyling]

Might take a while but sold mine in Jan.
6 footer 260 with -0- problems.
Don't remember exact but around $675.
With possible problems maybe $500??

 

[bhazard1]

Thanks for the response!

 

[pk-sd]

Brought some life back to my good old trusted illumina fixture. Mounted 2 Orphek OR3 UV/Violet LED bars. My SR260 has just the original pads, never upgraded.

 

[Yin_Yang247]

Power supply just died! Blue LED isn't on! :eek2:

Anyone willing to donate one to me?
Power Supply: MEANWELL GS220A24-R7B

 

[Vinny Kreyling]

I'm sure it can be replaced by a new unit from Mean Well.

 

[Yin_Yang247]

For Sale: Vertex illumina SR260 LED (48" inch)
$500 shipped (Paypal only)
Needs firmware uploaded into a few LED pads every time it's unplugged.
One power supply is dead and other is still good, and you can order a new power supply online!
All needed software/firmware & USB V-Link will be included too.
Beware! VERY BRIGHT & POWERFUL!!!
Will respond to private messages and not to replies here!

 

[Yin_Yang247]

[[[[ s o l d ]]]]

for sale: Vertex illumina sr260 led (48" inch)
$500 shipped (paypal only)
needs firmware uploaded into a few led pads every time it's unplugged.
One power supply is dead and other is still good, and you can order a new power supply online!
All needed software/firmware & usb v-link will be included too.
Beware! Very bright & powerful!!!
Will respond to private messages and not to replies here!

 

[EdMiller]

Don't know if anyone has any support or insight to offer anymore on these lights. Before I give up and replace my 260, I'll ask here to see what I can try.

I have one module (#2) that will not work. I've tried all I can think of any some of what I've found here with no success. I ran a diagnostic on the unit and the module shows no values and a firmware version of 1. I've tried all methods of updating the firmware for the module with no success. It will go through the upload process fine but when it finishes it gives the error that the firmware update failed for module #2(error new version mismatch(1 vs 2162)). I am updating it with the v2162 firmware so do not understand this error.

 

[DiazE]

Do not know if this was posted, since I have been out for a while. This is v-link desktop software file.

https://www.scitronix.com/download/SciTronix_Desktop_for_WIN_PC.zip

 

[EdMiller]

My light is officially done now and replaced with a pair of Radion G5s I'll try to sell the Vertex for parts if there is interest. The power supplies are still good and I have the V-Link usb stick. There are now two pads that malfunction.

Edit: I did discover that by resetting all pads in the software, they will all work until it is disconnected from power and then it's back to the same issue with the same two pads not lighting.

 

[Jersey Corals]

Have an SR260 with a broken lcd display. Anyone have a replacement or insight how to reconnect V link

 

[griss]

Have an SR260 with a broken lcd display. Anyone have a replacement or insight how to reconnect V link

Maybe try Fix Reef?