watson marlow peristaltic pump for ca rx

[spscrackhead]

I am looking for a peristaltic pump for my geo 618. I have come across a watson marlow 405U/R1 on ebay and was wondering is this would fit my need.
Features:
Single ChannelFlow Rate of 0.44 to 610mL/min.
Speed Control Ratio of 10:1
Minimum Speed of 20rpm
Maximum Speed of 200rpm
Can be remotely controlled
Electrical Requirements of 110/120V 60Hz

If anyone has any other recommendation I am open to suggestions.

 

[Vinny Kreyling]

Watson Marlow is a good pump but 44 ml/min could be too much for the low speed.

 

[Member No. 1]

I looked up spec, the flow rate is 0.44 to 610 ml/min.
That should be low enough.

Specifications
Model
405U/R1
Channels
1
Shipping Weight (English)
7.7 lb.
Storage Requirements (English)
-40°F to +158°F
Certifications/Compliance
CE, BS0800, IEC335-1, EN60529
Electrical Requirements
110/120 V 60 Hz
Voltage
110/120 V
Frequency
60 Hz
Temperature (Metric) Max
40°C
Temperature (English) Min
41°F
Flow Rate
0.44 to 610 mL/min.
Motor Type
Reversible
Shipping Weight (Metric)
3.5 kg
Storage Requirements (Metric)
-40°C to +70°C
Noise Level
<70 dB (A)
Reversible
Yes
Enclosure Rating
IP21 Wipedown
Temperature (English) Max.
104°F
Temperature (Metric) Min.
5°C