How long has it been when you change out the media? Mine has been going up as the media filter and rodi getting spent. My tap is sometimes as high as 500-600+ with 0 reading but lately its been around 350-400.
when your tds gets high what filters do you guys replace.. once my ro/di hits 5 i replace all the filters but the membranes.. which ones do you guys change out
I replace the sediment and carbon block every 6 months. I only change the DI resin when the TDS is 1-2.
Keep in mind the prefilters protect the membrane from damage caused by sediment and chlorine/chloramines. The DI is used to polish the post RO to 0, so the two scenarios are not related. Keep the membrane protected or it will be costly.
A working RO should get rid of 95% of your TDS before the DI. Savethereef's RO is working perfectly. 442 TDS to 6 TDS before the DI.
RO Membrane that are 90GPD or higher has a 90% efficiency meaning 400 TDS will take it down to 40 TDS and your DI will exhaust faster (3x-5x faster) so swap those membranes for more efficient ones
DI costs more to replace. Membranes are cheaper.
If your TDS is high check the drain line. It should produce 4x waste what your RO produces ie 1 oz of RO water = 4 oz of waste water.
75GPD or lower RO membranes are $25-$45. Get the DOW filmtec brand. Sponsors here sell them but fleabay are the cheapest.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.