Which fitting to connect my water supply to RODI unit?

[kzaveri19]

Hi friends,

I am trying to connect my RODI unit (purchased from filterdirect.com) to my bathroom sink. I have 3/8 OD x 1/2 FPT (Pic attached). The adapter that came with the unit does not work. Any off the shelf adapter I can buy to use with this?

The RODI uses 1/4" tubing.

Thank you

 

[Shaummy]

You can use one like this from BRS but you would also need a valve to shut the water flow off too...in second link..

1⁄4" EZ Angle Stop Adapter
SKU: 200814

http://www.bulkreefsupply.com/mur-lok-ez-angle-stop-adapter.html


1⁄4" x 1⁄4" Inline Ball Valve Push Connect
SKU: 200024

http://www.bulkreefsupply.com/mur-lok-ro-inline-ball-valve-push-connect.html

 

[Vinny Kreyling]

Try this:
https://www.freshwatersystems.com/p-7107-parker-liquifit-angle-stop-adapter-valve-38-x-38-x-14.aspx

 

[Shaummy]

Try this:
https://www.freshwatersystems.com/p-7107-parker-liquifit-angle-stop-adapter-valve-38-x-38-x-14.aspx

That will work as well...but you'll have to climb under the sink to turn it off and on all the time. If you use the separate ball valve you can locate it a little more accessible.