RC sponsors definitely rock. Euro-reef agreed to provide their RC-250 skimmer for either no cost or maximally at 50% off wholesale cost which would put it at only about $175. Ice cap will be looking over my proposal but stated interest in providing not only lighting but also possibly their Vor-tec pump. For those not familiar, that is the state of the art power head where there is no heat transfer since the motor is held outside of the tank by a powerful magnet. This baby moves water and uses very little energy. I will be hearing from both companies very soon. Next, we need to work on RO-DI and auto top off system and a return pump and we are almost there! Any ideas of who to contact for these would be appreciated.
zoo tank updates
- Thread starter drbronx
- Start date
nwrogers
Got gorgs?
OK here is a tentative list that I started. Please feel free to add to it or ask questions about it...
Stuff to get from Fish Store (Donations?)
1 - Euro Reef skimmer
3 - Eheim-JAGER TS Heater - 250 watt
1 - Large Roll of Filter Floss (Are we going to use this?)
1 - Warner Marine PHOSaR Phosphate Remover 4000 Gram
1 - Black Diamond Carbon 68 oz - MarineLand, 3.65 L
6 - Mesh Nylon Media Bags
1 - Return pump (We still have to decide on this pump)
1 - Icecap VHO Retro
2 - Icecap Vortech pumps
1 or 2 - 72" (VHO, T12) Super Actinic R, 160W -URI
1 or 2 - 72" (VHO, T12) 10,000K Aquasun, 160W -URI
3 - 5 gallon buckets of instant ocean synthetic salt
1 - RO/DI 100 Gallon per day units
2 - ¾†threaded male penductors
1 - Reefkeeper to control fans, heaters, powerheads, and lights
2 - ¾†Uniseal Slip Seal Gaskets
2 - 1" Uniseal Slip Seal Gaskets
2 - AQUA LIFTER VACUUM PUMPs
2 - PRE-FILTER FOR AQUALIFTER
1 - Aqualight Digital Power Center
1 - Top Off of some kind (Maybe a Reef Fanatic Level Controller w/2 Float Switches?)
1 - Hydrometer or Refractometer of some kind (open to suggestions)
1 - Set of Salifert Test Kits (Let's get a bunch)
Stuff to get from local stores (Cash)
1 - Large bag of Dow Flake
4 - Boxes of Baking Soda
2 - Honeywell FAN SUPER TURBO HP BK Sump Fans
4 - Extension cords
4 - Power strips
2 - 10' long 1†PVC pipes
1 - 10' long ¾†PVC pipe
8 - 1†90° PVC fittings
8 - 1†45° PVC fittings
8 - 1" PVC Unions
1 - 1.25" PVC Union
2 - 1.25" PVC T fitting
1 - 1" PVC T fitting
3 - 1.25" PVC male to 1†female reducer bushings
3 - 1" PVC male slip to ¾†female threaded reducer bushings
1 - 1.25" threaded to slip PVC connector
1 - 1.25" threaded PVC reducer size depending on pump
2 - 1" PVC ball valves
1 - 1.25" PVC ball valve
1 - 100 gallon rubbermaid brute container for sump
1 - 5 ft. long ¾†Vinyl Tubing
1 - 5 ft. long 1†Vinyl Tubing
2 - ¾†male threaded to male barb adapters
2 - ¾†vinal hose clamps
2 - ¾†PVC cross fittings
8 - ¾†PVC 90° fittings
8 - ¾†PVC Endcaps
1 - panel of Light Diffuser (Egg Crate)
1 - 20' roll of 1/4" OD Tubing
Stuff to get from Fish Store (Donations?)
1 - Euro Reef skimmer
3 - Eheim-JAGER TS Heater - 250 watt
1 - Large Roll of Filter Floss (Are we going to use this?)
1 - Warner Marine PHOSaR Phosphate Remover 4000 Gram
1 - Black Diamond Carbon 68 oz - MarineLand, 3.65 L
6 - Mesh Nylon Media Bags
1 - Return pump (We still have to decide on this pump)
1 - Icecap VHO Retro
2 - Icecap Vortech pumps
1 or 2 - 72" (VHO, T12) Super Actinic R, 160W -URI
1 or 2 - 72" (VHO, T12) 10,000K Aquasun, 160W -URI
3 - 5 gallon buckets of instant ocean synthetic salt
1 - RO/DI 100 Gallon per day units
2 - ¾†threaded male penductors
1 - Reefkeeper to control fans, heaters, powerheads, and lights
2 - ¾†Uniseal Slip Seal Gaskets
2 - 1" Uniseal Slip Seal Gaskets
2 - AQUA LIFTER VACUUM PUMPs
2 - PRE-FILTER FOR AQUALIFTER
1 - Aqualight Digital Power Center
1 - Top Off of some kind (Maybe a Reef Fanatic Level Controller w/2 Float Switches?)
1 - Hydrometer or Refractometer of some kind (open to suggestions)
1 - Set of Salifert Test Kits (Let's get a bunch)
Stuff to get from local stores (Cash)
1 - Large bag of Dow Flake
4 - Boxes of Baking Soda
2 - Honeywell FAN SUPER TURBO HP BK Sump Fans
4 - Extension cords
4 - Power strips
2 - 10' long 1†PVC pipes
1 - 10' long ¾†PVC pipe
8 - 1†90° PVC fittings
8 - 1†45° PVC fittings
8 - 1" PVC Unions
1 - 1.25" PVC Union
2 - 1.25" PVC T fitting
1 - 1" PVC T fitting
3 - 1.25" PVC male to 1†female reducer bushings
3 - 1" PVC male slip to ¾†female threaded reducer bushings
1 - 1.25" threaded to slip PVC connector
1 - 1.25" threaded PVC reducer size depending on pump
2 - 1" PVC ball valves
1 - 1.25" PVC ball valve
1 - 100 gallon rubbermaid brute container for sump
1 - 5 ft. long ¾†Vinyl Tubing
1 - 5 ft. long 1†Vinyl Tubing
2 - ¾†male threaded to male barb adapters
2 - ¾†vinal hose clamps
2 - ¾†PVC cross fittings
8 - ¾†PVC 90° fittings
8 - ¾†PVC Endcaps
1 - panel of Light Diffuser (Egg Crate)
1 - 20' roll of 1/4" OD Tubing
nwrogers
Got gorgs?
Also I have contacted Drs Foster Smith and Premium Aquatics and they are interested in reading our proposal. I have also contacted Marine Depot and I am waiting on a call back from them. After we finalize the things we need using the list above we can write the proposal to these places and see what we can get. Jerry can you assist me in typing up the proposal? I am just so busy it is hard to keep up with all of this stuff. I hope that list give us a good jump start on things…
Great list Nate. Very comprehensive. Very close to what i had compiled. The main difference is I am asking Ice cap for T-5 lighting equipment so that we can have the flexibility to include sps and clams, though that can really be done with vhop as well. I will be thrilled if they include the Vor-tech pumps otherwise to save cost over a closed loop system i was thinking of a couple of 1200 maxi mods. Anyway, i will be happy to type up the proposals. I'll give you a call. thanx for your time and effort. Everybody please feel free with ideas, suggestions, substitutions etc.
Nate, Vince said he has a 55 gallon rubbermaid tub. is that too small for our purposes. Also we'll need a magfloat glass scraper sufficient for 180 glass thickness, a glass scraper, fish net. Also for now we can get away with individual timers if we can't get a controller unit. Also, what are the aqua lifter's for. I assume thats for adding Randy'sw two-part solutions or kalk?
Can someone create a specific list of materials needed for the tank stand? I know Vince drew up a nice plan for a stand. We need to break it down so that the zoo can make the purchases.
Can someone create a specific list of materials needed for the tank stand? I know Vince drew up a nice plan for a stand. We need to break it down so that the zoo can make the purchases.
Blugobi
New member
That would be great if they do throw in a Vortech, it would be a lot less plumbing to deal with, however, I have been following the Vortech thread and I have mixed feelings with it. Some love it and some seem to have a ton of problems, like frying the controllers and with it not staying in place. I do believe there is supposed to be a new and improved model avilable so it may be good to go....Free is always good!
Geo
When do you need the IO buckets? I'm able to get 200 gal buckets of IO for less than the 160 gal buckets. I'm still working getting established with suppliers, so timing might be an issue for me.
Nate, not sure if I told you but I think I can get PVC stuff at cost, so if you want me to see what prices I can get the PVC from let me know. Oh and with the ball valves, are they going to be the true ball valves, or the cheaper ones?
Is the tank going to be running a UV Sterilizer? Are we looking at using any of the Pinpoint monitors?
This may be a bit minor, but what type of extension cords are we looking to use for this? The heavy duty 3 prong? Is there already wiring in the walls for the power supply?
These are just a few things I can think of for now.
Nate, not sure if I told you but I think I can get PVC stuff at cost, so if you want me to see what prices I can get the PVC from let me know. Oh and with the ball valves, are they going to be the true ball valves, or the cheaper ones?
Is the tank going to be running a UV Sterilizer? Are we looking at using any of the Pinpoint monitors?
This may be a bit minor, but what type of extension cords are we looking to use for this? The heavy duty 3 prong? Is there already wiring in the walls for the power supply?
These are just a few things I can think of for now.
zanclus
In Memoriam
Just a thought if the Zoo wants things to be simple maybe they should consider a Neptune system instead of several separate controllers and monitors . Though pricey, a Neptune can handle all of the tanks needs and can also be connected to a computer for monitoring. But after purchasing several light times, Ph meters, and the like, a Neptune looks like a good idea....
Blugobi
New member
I have not been to see the location for the tank, but dose the sump have to be under the tank? Is there room to have it off to one side?......The reason I ask is due to acessability, is the sump going to be a Refuge as well? Is the skimmer going to be a stand alone or in the sump?
I think a meeting is in good order so we can decide what is going to be what. We should start with the room demensions and layout of equipment. Don't want this to turn into what the wire mess looks like behind my computer...:eek1: Anyway...some serious pre-planning will save a lot of time and frustration. Just my 2-cents.
Geo
Similar threads
