8BALL_99
New member
Hey everyone, I posted this in my local club forum. Thought I'd see if anyone here is interested. I live in north Alabama Between Athens and Harvest about 15 or so mins from ardmore.
Since I moved the tanks and built my 180 into the wall I dont need my other Stand and Canopy anymore. Its made from solid oak and oak plywood. Its alot nicer then a factory stand! It holds a standard 180. I can give Exact measurements if wanted. The inside of the canopy and stand are both painted with Acrylic latex paint. The bottem of the stand is lined with plastic sheeting.
Here is a couple pictures
I dont have any pictures with the tops up.. But the doors in the front all open so does the very top of the canopy. The canopy top lifts in two sections.. Like two big doors basiclly that are hinged in the back.
Asking 300 for the set OBO
If anyone is interested I also have my Control box I made that matches it.. It houses 2 power strips with switches. It also has room to mount 3 Electronic ballasts. The top is cut out for a AquaController 2. Asking 50.00 simply cause thats what the powerstrips cost me. If noone wants the box I'm just going to take them back out and reuse them
And last thing is I have a Aquacontroller 2 That I'm selling.. Its the same one in the control box in the picture. The controller comes with Standard grade PH probe, Orb probe, Temp probe. X10 controller and a few x10 plug ins. Works great I'm only selling it cause I got a Aquacontroller 3 that can monitor both my tanks. Say 200 for it.
Since I moved the tanks and built my 180 into the wall I dont need my other Stand and Canopy anymore. Its made from solid oak and oak plywood. Its alot nicer then a factory stand! It holds a standard 180. I can give Exact measurements if wanted. The inside of the canopy and stand are both painted with Acrylic latex paint. The bottem of the stand is lined with plastic sheeting.
Here is a couple pictures
I dont have any pictures with the tops up.. But the doors in the front all open so does the very top of the canopy. The canopy top lifts in two sections.. Like two big doors basiclly that are hinged in the back.
Asking 300 for the set OBO
If anyone is interested I also have my Control box I made that matches it.. It houses 2 power strips with switches. It also has room to mount 3 Electronic ballasts. The top is cut out for a AquaController 2. Asking 50.00 simply cause thats what the powerstrips cost me. If noone wants the box I'm just going to take them back out and reuse them
And last thing is I have a Aquacontroller 2 That I'm selling.. Its the same one in the control box in the picture. The controller comes with Standard grade PH probe, Orb probe, Temp probe. X10 controller and a few x10 plug ins. Works great I'm only selling it cause I got a Aquacontroller 3 that can monitor both my tanks. Say 200 for it.
