4 way ocean motions question?

jwccwj

New member
Hi,i was just wondering if it matters how you set up your 4 way,I know alot run them of there return line but I was going to use one of my 1.5 inch drains in my overflow with a pump sorta like a closed loop i guess except im using a overflow drain and not drilling the tank,will this be ok?any drawbacks to this method.

thanks.:rolleyes:
 
id run it off my return but i want to gravity feed my skimmer 100% of the overflow water and i was planning on using smaller pump to do this,i dont want any drainage by passing the skimmer to the sump,therefore id be running a 4 way on a small pump(low gph).
 
why dont you just use it on a closed loop and hang the PVC over the back instead of drilling? I wouldnt use your return to get flow in the tank, you will be pushing too much water through it plus its just pointless and noisy
 
shag26272 I agree with you,right after i posted i realized it won't work,i never thought about hanging the pvc over the back thats a good idea, thanks.
 
just put a strainer on the pipe that goes into the pump and run it down the back wall of the tank or something like that
 
aquarium specialty has them there a sponser here on rc,ive heard nothing but good reviews on oceans motions.
 
<a href=showthread.php?s=&postid=9507492#post9507492 target=_blank>Originally posted</a> by jwccwj
cool,ive seen that done before.thanks again.

If your going over the top with a 4way use 45 degree elbows instead of 90's.

Here is how I instaled mine.
4waydone.jpg

4wayinstalled.jpg
 
Back
Top