450 Gallon Reef Setup

Hydrologist

New member
Well, this system has been almost a year in the making. Here is the equipment list.

I have a 220 gallon (72x30x24) and a 150 (48x24x30) that will be plumbed into a sump located in a small "fish room". The 220g will go along my back wall and the 150g will go behind my bar.

Equipment list:
Tanks:
220g (72x30x24) - Starphire front and sides, bean style overflow along back, eurobraced, back of tank painted black.
150g (48x24x30) - Starphire front, back, side, Herbie (or Durso) overflow, eurobraced.
Sump (60x30x18) - Divided into Skimmer, Refugium, Return

Other:
- x2 Pacific Sun Black Python 160w LED (for 150)
- ATI 10x80w Powermodule (for 220)
- Profilux 3 Ex (pH, ORP, Salinity, Temperature) - Auto top off
- Profilux 5 breeze fan
- Profilux 3SA doser
- x3 PAB powerbars
- Profilux LED touch screen
- Vertex Alpha Kone 300
- Water Blaster HY5000 (return for 150)
- Blueline HD40x (return for 220)
- x2 300w Heaters
- x3 MP40's
- x2 VT battery back ups
- Profilux Vortech Module
 
The basement was gutted, here is the framing for the new tanks.

IMG_1216.JPG
[/IMG]

This is where my 150 is going behind my bar.

IMG_1223.JPG


A picture of the stand for my 220 (I think it will hold :lol2:)

IMG_1228.JPG
 
Here is a pic of my holding tank for my 180 FOWLR. It's a 135 that I will use a QT once I move my fish back to the 180 (the 180 tank will be in the same room, but not plumbed into the reef system)

IMG_1209.JPG



Some close ups of the fish.
IMG_1207.JPG


IMG_12021.JPG
 
Insulation with wall plates for the plumbing.

041920111229.jpg




Full view of the insulation and the pipe installed for the 225

041920111225.jpg
 
Last edited:
150g on the stand in the wall behind the bar
150%20on%20Stand.JPG



Picture from behind the 150g where the sump is located. Both the 150 and 225g will drain into this sump
Picture%20from%20Behind%20the%20150.JPG


Plumbing behind the wall (before the insulation)
Plumbing%20Started.JPG


Plumbing%202.JPG
 
Last edited:
Thanks for the compliments guys.

Here is the frag tank (60x36x12). The picture shows just one 25ow pendant but I now have two over the tank. It is plumbed into the main system with the other two tanks.

IMG_0483.gif


IMG_0491a.gif


IMG_0489.gif


IMG_0497.gif
 
Back
Top