6 in acrylic tubing

[geoxman]

I am going to build a sulfate reactor and I am going to use 6in acrylic tubing for the build. I have to buy 6 feet and I only need 2. If any one is thinking about a DIY skimmer, etc... I will have 4 feet left over. I more than likely will not buy it unless some one wants the other 4 ft. It will be around $8 per ft, so figure about $33 after shipping for the whole 4 ft piece, or I might be able to use one more foot if someone only needs 3 ft.

 

[kellyjn]

Can I buy two feet of it? Anyone else want the other two feet?

 

[fazgood]

How thick is the wall?

Faz

 

[kipher]

I may be intrested. Is the stuff clear or colored acrlyic? and as Fazgood asked how thick? Could you post a link to it?

 

[geoxman]

It is 1/8 inch thick extruded acrylic and it is clear, perfect for a skimmer or reactor. I tried to get a color but they had none.
http://www.usplastic.com/catalog/va..._name=21315&product_id=11248&variant_id=44550
JLMK

 

[Schplitter]

<a href=showthread.php?s=&postid=11772627#post11772627 target=_blank>Originally posted</a> by geoxman
It is 1/8 inch thick extruded acrylic and it is clear, perfect for a skimmer or reactor. I tried to get a color but they had none.
http://www.usplastic.com/catalog/va..._name=21315&product_id=11248&variant_id=44550
JLMK

I built that skimmer out of 1/8 and I broke it too many times. If you plan on using uniselas I would go with 3/16. 1/4" is overkill but 100X better then 1/8...

BK

 

[kipher]

Phil your Inbox is full. Clean'er up.