McLaughlin4
New member
Hello ,
I was out of the hobby for some years but I'm getting my feet wet again . I thought I would start a build thread to try to give back to someone else what I have learned from this site over the years . With that said lets begin :lol:
I just finish building the stand and canopy for the tank which is a 60 gallon cube tank 24x24x24. I have also bought most of the equipment needed to run this tank but thought along with pictures of the tank,stand and canopy . I would list what I have so far so that if I'm missing anything I will have it for the initial set-up . Here is what I have :
Skimmer: MRC R-1
Skimmer Pump- Blue Line HD 40
Return Pump: Blue line HD-55
Geo Kalk Reactor
Chiller
2 rubbermaid feedtanks one for a fuge and frag tank the other for the sump
Lighting : 250 watt DE retro kit for inside the canopy along with 2 24 inch T5 retro kits on each side and 2- 4 inch 4 led moonlights.
bulkheads
lockline
6 stage Ro-Di water filter
Rubbermaid Brute garbage can
Auto top off w/ float valve
2 Hydor Koralia #2
300 watt heater
So is there anything I might have forgot ? If so let me know, and feel free to give me any advice you might find helpful. The tank is going to be plumbed into the basement so the fuge sump set up is the next big step. Enjoy the pictures :
Oh yea I have yet to step into a LFS to buy anything I have it has either been ordered online or purchased from someone on here , thanks to those of you that sold me stuff.
TANK
Stand not yet totally finished need to fill nail holes and stain
Canopy also need sto be stained and nail holes filled
This is just all the equipment waiting to be used
I was out of the hobby for some years but I'm getting my feet wet again . I thought I would start a build thread to try to give back to someone else what I have learned from this site over the years . With that said lets begin :lol:
I just finish building the stand and canopy for the tank which is a 60 gallon cube tank 24x24x24. I have also bought most of the equipment needed to run this tank but thought along with pictures of the tank,stand and canopy . I would list what I have so far so that if I'm missing anything I will have it for the initial set-up . Here is what I have :
Skimmer: MRC R-1
Skimmer Pump- Blue Line HD 40
Return Pump: Blue line HD-55
Geo Kalk Reactor
Chiller
2 rubbermaid feedtanks one for a fuge and frag tank the other for the sump
Lighting : 250 watt DE retro kit for inside the canopy along with 2 24 inch T5 retro kits on each side and 2- 4 inch 4 led moonlights.
bulkheads
lockline
6 stage Ro-Di water filter
Rubbermaid Brute garbage can
Auto top off w/ float valve
2 Hydor Koralia #2
300 watt heater
So is there anything I might have forgot ? If so let me know, and feel free to give me any advice you might find helpful. The tank is going to be plumbed into the basement so the fuge sump set up is the next big step. Enjoy the pictures :
Oh yea I have yet to step into a LFS to buy anything I have it has either been ordered online or purchased from someone on here , thanks to those of you that sold me stuff.
TANK
Stand not yet totally finished need to fill nail holes and stain
Canopy also need sto be stained and nail holes filled
This is just all the equipment waiting to be used