Anyone know what this is?

[uruguayanreefer]

Got a reef controller yesterdat and this was in the
Package. Pic should be posted but if not it
Its a small black box with a wired switch on it.
It Has one input jack
3 outputs and a 4th one that says interconnect

The unit is labeled WR-JP-4/1

 

[uruguayanreefer]

I mean it it really just looks to be a box to get multiple 2.1mm jacks
I just cannot find anything about
Load rating or anything

 

[sflorlando]

what type of controller? What types of interconnects.

My guess is it would be breakout box to add inputs to the controller. Such as water detectors, buttons, switches, etc. There's a common for all and individual wires to detect if they have a circuit to the common wire.

Similar to this thread http://www.reefcentral.com/forums/showthread.php?t=1847474

Ken

 

[Swirlygig]

Looks like a breakout box...float switch, solenoid, etc.

 

[uruguayanreefer]

Definitely not a breakout box
I opened it up and the circuit board shows
Input connected to all the outputs

I think its just a box u send power to and can tap 4 other outputs too... if that makes sense

 

[beaudiver758]

yes its a y box. you can run up to four of them

 

[jmking33]

I thought it was a y box too. Its a reef keeper system.

 

[uruguayanreefer]

Got any info on them?

 

[Jeanie]

I need one of these.

I need one of these.

Got a reef controller yesterdat and this was in the
Package. Pic should be posted but if not it
Its a small black box with a wired switch on it.
It Has one input jack
3 outputs and a 4th one that says interconnect

The unit is labeled WR-JP-4/1

I need one of these to replace one that was used when my Puck lights were installed. The switch at the end has a short or something & wont stay on. Anyone know where I can find one? I have looked on line & at Lowes & HD.