Apex and Old Tunze Streams

[thetedinator]

I have a number of old streams (6000, 6100 and 6200). All working perfectly. I have several 7095s to control them but would like to control all of them with an Apex Controller. I see there is a cable available from Apex that seems to plug into the controller and then to two streams.

Is there a way to control more than two older streams with the Apex?

Thanks

 

[Mark Bianco]

The standard vdm either the module or built into the Apex itself is capable of controlling up to 4 devices independently. That being said there have been some that will buy two Tunze splitter cables and control 8 pumps 2 pumps paralleled on each channel of the Apex

HTH

 

[thetedinator]

The standard vdm either the module or built into the Apex itself is capable of controlling up to 4 devices independently. That being said there have been some that will buy two Tunze splitter cables and control 8 pumps 2 pumps paralleled on each channel of the Apex

HTH

Thanks Mark. That helps. I did not understand that the Variable Dimming Module could also control variable speed pumps.

 

[Mark Bianco]

As long as the device you want to control NOT power uses a 0 - 10 vdc signal you are good to go.