ATO and Kalk with 2 floats program

[Saltybob]

I'm having issues with this and think I'm on the right track.
Basically I have a 5 gallon bucket with kalk that I'm using for top off via a aqua lifter but want to restrict to night ,low PH and on a hourly period.
I'm still working out my daily evap rate and will program 25% over that after established.
Here is what I have so far.

Fallback OFF
OSC 059:00/001:00/000:00 Then ON
If Time 10:00 to 22:00 Then OFF
If pH > 08.30 Then OFF
If Switch1 OPEN Then OFF

I still need to work on my high sump program.
Any help would be great since I cant seem to find any post that deal with this in depth.

 

[swearint]

Looks about right, but I don't think you need the Min Time command. The OSC is running for a full minute already. Also, you can delete the Set OFF. It is redundant to the OSC since it generates both OFF and ON states at precise intervals.

Todd

 

[Saltybob]

Looks about right, but I don't think you need the Min Time command. The OSC is running for a full minute already. Also, you can delete the Set OFF. It is redundant to the OSC since it generates both OFF and ON states at precise intervals.

Todd

Ok, edited the lines you were talking about and that makes since.
Thank you