Can someone with a 10g tank please measure for me?

[Newreeflady]

I need the width measurement (front to back) of a 10g standard aga tank on the outside at the widest point (the black trim.)

Can someone please take this measurement for me. I need it to be accurate because I have to make sure it will fit in a particular space.

Thanks
Angela

 

[bennerkla]

I'm almost positive they are 20" long, maybe 10" deep?

Just thought I'd give you an idea.

 

[mr pink floyd]

i think its something liek 16x10x10

might be 20

check some dimensions in the tank vol. calculator

 

[bennerkla]

The 5.5 is 16", I'm pretty sure the 10 gallon is 20"

20" x 10" is my bet, check that out on the volume calc and see what you get.

 

[mr pink floyd]

on the tank vol. i got 20x10x16 (LxDxH)

is 10.4

 

[Jeremy386]

Mine measures at the outer edges of the black rim..

20 1/8 wide, 12 1/8 tall, 10 1/8 deep.

Jeremy

 

[Newreeflady]

<a href=showthread.php?s=&postid=7549069#post7549069 target=_blank>Originally posted</a> by Jeremy386
Mine measures at the outer edges of the black rim..

20 1/8 wide, 12 1/8 tall, 10 1/8 deep.

Jeremy

Thank you, this is exactly what I was looking for! I have 11 1/4" of space, so this will fit. I believe the 15g tall would be exactly the same in depth.

thank you!
Angela

 

[chocolateblnt]

You can actually go on the All Glass Aquarium website and find all dimensions they actually produc there ... !

 

[yankeereefer]

This still may not work for you - Even if you are drilling the bottom of tank for overflow, there won't enough clearance behind it for the returns. Neither will there be room HOB filter. Unless I'm missing something...

 

[Newreeflady]

<a href=showthread.php?s=&postid=7549881#post7549881 target=_blank>Originally posted</a> by chocolateblnt
You can actually go on the All Glass Aquarium website and find all dimensions they actually produc there ... !

Of course i've done this. But, they don't take their measurements at the widest point.

Anyhow, the question was answered. Thanks to Jeremy for taking the time to measure the trim.

Best,
-A

 

[Newreeflady]

<a href=showthread.php?s=&postid=7550793#post7550793 target=_blank>Originally posted</a> by yankeereefer
This still may not work for you - Even if you are drilling the bottom of tank for overflow, there won't enough clearance behind it for the returns. Neither will there be room HOB filter. Unless I'm missing something...

You are missing something. Don't worry about the project, the question was answered.

Thanks,
Angela