dugg
New member
Ok, not sure if this is a problem or not, but i want to make sure. My new chiller has a temperature variation of +/- 2*. I have it set at 77*, so it kicks on at 79.5* and back off at 77.5*. The chiller runs about 10 to 15 minutes every 2 to 2 1/2 hrs. , so the temp is going up and down by 2* every 2 hrs. I looked around at other chiller specs., and they all seem to have the same 2* temp. variation. So is this acceptable for my sps, or is there a way to stabalize this further?
I have never run a chiller before, and i know this one is overkill for my system, but didn't want to have one too small when i get my bigger tank. It is a pacific coast cl-650 1/4 hp. , and i have about 45 gallons actual water volume. I'm running it inline with the return pump. (mag7)
I have never run a chiller before, and i know this one is overkill for my system, but didn't want to have one too small when i get my bigger tank. It is a pacific coast cl-650 1/4 hp. , and i have about 45 gallons actual water volume. I'm running it inline with the return pump. (mag7)