EVERYTHING O.B.O. TRADE FOR MAXI MOD OR VHO END CAPS
post here if interested.
FREE - cheato and GSP and 10g tank.
10$ each - 1 red cap, 4 purple caps.....all larger then silver dollar.
70$ - corallife super skimmer 125. did mesh mod, but didnt mess with it too much after doing mod. worked well, seems to need to be closer to the surface to pull air. have original needle wheel to use it stock.
20$ - super skimmer knock off. bout the same size as the 125, much larger cup. tried to ship it and some stuff broke off. the exit tube would have to be glued back in, and theres a cone on the inside that broke away. but the rest is in good shape and could be a decent skimmer.
15$ - seio 1100. dirty and the bracket that attachs to the swivel is cracked, but i used it without problem. have original box and parts.
15$ - genx-2400. needle wheel w/ mesh mod.
120$ - mag36. lightly used, new impeller.
15$ - mag12. used for a year as a return pump. it quit pumping at full power, so i cleaned it...and not much better. maybe a new impeller would do the trick.
50$ - return plumbing. over 50$ in loc line. stands about 57 inches from bottom of union to bottom of horizontal exits(what would rest on the tank edge). flowed more gph from the mag36 then 2 1-1/2" drains could handle.
post here if interested.
FREE - cheato and GSP and 10g tank.
10$ each - 1 red cap, 4 purple caps.....all larger then silver dollar.
70$ - corallife super skimmer 125. did mesh mod, but didnt mess with it too much after doing mod. worked well, seems to need to be closer to the surface to pull air. have original needle wheel to use it stock.
20$ - super skimmer knock off. bout the same size as the 125, much larger cup. tried to ship it and some stuff broke off. the exit tube would have to be glued back in, and theres a cone on the inside that broke away. but the rest is in good shape and could be a decent skimmer.
15$ - seio 1100. dirty and the bracket that attachs to the swivel is cracked, but i used it without problem. have original box and parts.
15$ - genx-2400. needle wheel w/ mesh mod.
120$ - mag36. lightly used, new impeller.
15$ - mag12. used for a year as a return pump. it quit pumping at full power, so i cleaned it...and not much better. maybe a new impeller would do the trick.
50$ - return plumbing. over 50$ in loc line. stands about 57 inches from bottom of union to bottom of horizontal exits(what would rest on the tank edge). flowed more gph from the mag36 then 2 1-1/2" drains could handle.
