onehundred20 In Memoriam May 8, 2006 #1 Im wondering how I can cut the circles for the corner overflows in a AGA 120.
drtango New member May 9, 2006 #4 Jigsaw works fine. It cuts like soft pine. I made a template out of cardboard to be sure of a perfect fit before tracing onto the starboard. John
Jigsaw works fine. It cuts like soft pine. I made a template out of cardboard to be sure of a perfect fit before tracing onto the starboard. John
Wiskey New member May 9, 2006 #5 Jigsaw with a very aggressive tooth blade, if you go to slow it might melt a bit, in that case remove the blade wait a bit and go back at it. If you end up with a ruff cut it can be sanded. Whiskey
Jigsaw with a very aggressive tooth blade, if you go to slow it might melt a bit, in that case remove the blade wait a bit and go back at it. If you end up with a ruff cut it can be sanded. Whiskey
