DB8 channel issue

[jonjonwells]

I have a ACIII. One of the channels on one of my DB8s is acting weird.

It functions perfectly during it's ON cycle.
When it is supposed to be OFF, it will randomly turn on for a single minute and then turn off again. I have only noticed it happening once or twice a night, but still. The time it does this is always different. These are my VHO's and a midnight light freaks out my fish.
Outlet #6 BTW

Any ideas?

 

[Deleted member 143833]

This is often an indication of noise on the control wire. Easiest thing to try is to replace the contol cable (be sure to use a 4 (or 6) conductor phone cable. Next, try routing the control wire differently; keep it as far away from high-power devices as you can (ballasts are especially bad) and last, if all else fails contact Neptune. There is some built-in diagnostics that can help but they will need to walk you through enabling then and interpreting the readings.

 

[jonjonwells]

Alright. Will try new cables and see if that fixes it. Thanks much.