I purchased my Profilux3 a few weeks ago and just recently tried to set it up. I was able to connect to the GCC via USB connection. However, since that first connection, I have not been able to connect to the GCC via USB or LAN. I would like to start the whole start up process all over again. Can someone tell me how to return to the default settings? Thank you.
Default Settings
- Thread starter vitodog
- Start date
Jerel
New member
Are you inquiring about the Connection Settings or the System Settings?
Jerel
New member
Connection Settings is under [Devices] Administrative. You'll have the option to edit and remove specific connections.
Since you are not able to connect to your ProfiLux. I believe you would need to preform a factory restart from the ProfiLux itself.. I don't remember where that is located, check out the manual.
Since you are not able to connect to your ProfiLux. I believe you would need to preform a factory restart from the ProfiLux itself.. I don't remember where that is located, check out the manual.
Vinny@GHLUSA
New member
If you're having trouble connecting via USB, it may be a driver related issue. Reinstalling the USB driver usually does the trick. Otherwise, you may have to tell GCC exactly which COM port # the ProfiLux is connected to. You can find that answer in Windows Device manager, COM (Ports & LPT)
If you want to restore the ProfiLux default settings, you can do this using the controller buttons:
1. Press any of the arrow keys
2. Select System
3. Select Factory sett.
4. Confirm with yes
If you want to restore the ProfiLux default settings, you can do this using the controller buttons:
1. Press any of the arrow keys
2. Select System
3. Select Factory sett.
4. Confirm with yes
Thanks for your help jerel. I just got the answer from Vinny.
Thank you Vinny. I was on the phone with you yesterday. The instructions you gave me were spot on. I found the COM port # my Profilux is connected to but was unable proceed further because I still could not connect to GCC. So, I thought I would have better luck returning to the factory settings and start over. Thank again Vinny. See you at MACNA.
