Tahoe Reefer
New member
Hey MARS! I've got a few things to I'd like to sell or trade. Prices are listed. Only accepting Euphyllia corals for trade.
TLF reactor with rubber elbows, ball valve, bit of black vinly tube included - $15.
Dart / Snapper hybrid pump - $125. Unions and valves to connect to a sump available if you want them, nothing extra.
https://www.dropbox.com/s/eo5wkb7i9den3fa/2016-05-31 13.07.59.jpg?dl=0
https://www.dropbox.com/s/w4kbeug2oipidg4/2016-05-31 14.29.08.jpg?dl=0
BRS T5 retro kit for 2x 24w bulb setup w/o bulbs. Its in an old CF fixture wired with a switch and plug. It needs a hanging kit or some chain, no legs for fixture. Not dimable. Original CF reflector, not individual reflectors like the newer BRS kits have. - $30
https://www.dropbox.com/sc/0maayrc33jf6scu/AADwy9wMg4QvvOwJdDjVi1pHa
Clear acrylic sump 30" × 16" × 16" drilled for external pump with 2" sch80 bulkhead. I have the plumbing to connect the Dart to this sump. 2" input, 1 1/2" output
This sump has been cut, top portion of one compartments divider. - $25
https://www.dropbox.com/sc/zqy8meccmtdifkr/AADfUj6Z029lycSseT0bZASea
Skimz ump-39 sump BROKEN Beautiful sump 39" × 15" × 15"
I bought a new sump that arrived broken and is being replaced. They've told me to just dispose of this thing which seems like a shame. The sump was broken along the ATO chamber, the outter left wall of the sump. This side is very broken as you see in the picture. The rest of the sump seems very useable except for a minor leak that could be repaired. You could probably repair the ATO section too, idk. Im going to keep some of the component pieces for extra dosing tubes and probe pins and the socks. I will leave you the sump leveling pieces as well as the 1" pipes with splash guards and sock chamber splash guards. - Trade only.
https://www.dropbox.com/s/82zt790oke4fvty/2016-06-09 15.42.31-2.jpg?dl=0
https://www.dropbox.com/sc/80ff8cxkrgxj8a2/AAAf1nIkex0KDJsgigGk9paPa
120 gallon acrylic tank with Herbbie center overflow. 60" × 18" ×" 24" tall
Modified and plumbed it for a herbbie drain with 3/4" return all hidden in the center overflow. Spent $160 in plumbing sch 80 pipes, spears gate valvle, unions ect. Runs quiet! This tank has seen several years of use and has some scratches, mostly fine scratches. I recently used the novus scratch remover system on this tank but it could use another round to really look new. Tank comes with lids for the top openings. - $200
Rocks not included
https://www.dropbox.com/s/e88a899vp3covj8/IMG_20160614_2143331_rewind.jpg?dl=0
Whew that was a lot to say but, if you have any questions please pm me. Pm your number for extra pictures and respones.
TLF reactor with rubber elbows, ball valve, bit of black vinly tube included - $15.
Dart / Snapper hybrid pump - $125. Unions and valves to connect to a sump available if you want them, nothing extra.
https://www.dropbox.com/s/eo5wkb7i9den3fa/2016-05-31 13.07.59.jpg?dl=0
https://www.dropbox.com/s/w4kbeug2oipidg4/2016-05-31 14.29.08.jpg?dl=0
BRS T5 retro kit for 2x 24w bulb setup w/o bulbs. Its in an old CF fixture wired with a switch and plug. It needs a hanging kit or some chain, no legs for fixture. Not dimable. Original CF reflector, not individual reflectors like the newer BRS kits have. - $30
https://www.dropbox.com/sc/0maayrc33jf6scu/AADwy9wMg4QvvOwJdDjVi1pHa
Clear acrylic sump 30" × 16" × 16" drilled for external pump with 2" sch80 bulkhead. I have the plumbing to connect the Dart to this sump. 2" input, 1 1/2" output
This sump has been cut, top portion of one compartments divider. - $25
https://www.dropbox.com/sc/zqy8meccmtdifkr/AADfUj6Z029lycSseT0bZASea
Skimz ump-39 sump BROKEN Beautiful sump 39" × 15" × 15"
I bought a new sump that arrived broken and is being replaced. They've told me to just dispose of this thing which seems like a shame. The sump was broken along the ATO chamber, the outter left wall of the sump. This side is very broken as you see in the picture. The rest of the sump seems very useable except for a minor leak that could be repaired. You could probably repair the ATO section too, idk. Im going to keep some of the component pieces for extra dosing tubes and probe pins and the socks. I will leave you the sump leveling pieces as well as the 1" pipes with splash guards and sock chamber splash guards. - Trade only.
https://www.dropbox.com/s/82zt790oke4fvty/2016-06-09 15.42.31-2.jpg?dl=0
https://www.dropbox.com/sc/80ff8cxkrgxj8a2/AAAf1nIkex0KDJsgigGk9paPa
120 gallon acrylic tank with Herbbie center overflow. 60" × 18" ×" 24" tall
Modified and plumbed it for a herbbie drain with 3/4" return all hidden in the center overflow. Spent $160 in plumbing sch 80 pipes, spears gate valvle, unions ect. Runs quiet! This tank has seen several years of use and has some scratches, mostly fine scratches. I recently used the novus scratch remover system on this tank but it could use another round to really look new. Tank comes with lids for the top openings. - $200
Rocks not included
https://www.dropbox.com/s/e88a899vp3covj8/IMG_20160614_2143331_rewind.jpg?dl=0
Whew that was a lot to say but, if you have any questions please pm me. Pm your number for extra pictures and respones.
Last edited:
