ETSS Modification

montepora

Member of NJRC
I have an ETSS 800 and would like to modify it. Can anyone tell me where I can get the black acrylic tube they used for the mixing tower? TIA.
 
Guys, here is my situation.

I love my skimmer but I am switching to a larger system so I emailed ETSS asking if there is any upgrade parts available. The answer is no so I am planning to extend the mixing tower by a foot and will ask either Barrs or Andy from Myreefcreation for extended neck. I am hoping this modification would allow the skimmer to process larger water volume.

What I find is that the ETSS 900 has a higher mixing tower but the skimmer box is the same as ETSS 800 and this is what prompts the idea. :)


ETSS 800

ETSS 900
 
I don't think Only the mixing chamber is taller...........

They do a lot of research on these and to just "add" some length might not be the right way to go???:)
 
<a href=showthread.php?s=&postid=6568233#post6568233 target=_blank>Originally posted</a> by Reeforbust
I don't think Only the mixing chamber is taller...........

They do a lot of research on these and to just "add" some length might not be the right way to go???:)

The extension will be for the towers (ETSS has two) and the neck.

If you have any additional info, please share it with me? TIA.
 
nop but I got a great deal for a used ETSS 1000 :). Heck, I might use both the 800 and 1000 together. Talking about power...
 
HUM.... this doesnt sound good for ETSS skimmers...

I am in the middle between a ETSS SS or an ASM model...

hum...
 
How big are you going? I ran a 800 on my 280g reef and it kicked butt. I ran the recommended pump at the time which was a little giant. I don't remember if it was the pressure rated model.
 
Back
Top