mikejrice
Active member
https://youtu.be/bMLfWmeLs4k
Methodology:
The method I use for fragging the majority of hard corals is primarily the same with the cutting tooling being an Inland band saw.
Cooling liquid used is fresh mixed saltwater with enough iodine to color it a light amber. This helps to disinfect cuts as they're made which has shown to greatly increase frag survival.
All corals are stored during cutting in a small bucket holding water taken directly from their home aquarium. This water is used both to keep them wet as well as for rinsing any flesh away from cuts while I'm working on them.
All finished, and rinsed, frags or trimmed colonies are soaked in Brightwell Aquatics Restor dip to insure that minimal flesh is lost.
Both soak buckets are rinsed and replenished between colonies to reduce the risk of interactions between loose flesh of different coral species.
Notes about Favites:
Favites is one of the corals that will bear significant advantages if corallite boundaries are followed, so when cutting these corals, I always try to follow directly along the top of corallite walls.
As with most LPS corals with encrusting growth, cutting frags as thinly as possible will help to accelerate growth.
If there's a specific species of coral you would like to see fragged, please leave a comment below.
For more LPS Fragging info check out my LPS Fragging Guide:
https://issuu.com/reefhobbyistmagazine/docs/180714044334-e76181af707e4a80912fddc9bf2ffda2/42
Subscribe:
http://www.youtube.com/subscription_center?add_user=mikejrice1
http://www.elitereef.com
https://www.facebook.com/pages/Elite-Reef/233504278468
https://twitter.com/elitereef
http://www.captivecoral.net
http://www.fragging101.wordpress.com
Sent from my SM-G920P using Tapatalk
Methodology:
The method I use for fragging the majority of hard corals is primarily the same with the cutting tooling being an Inland band saw.
Cooling liquid used is fresh mixed saltwater with enough iodine to color it a light amber. This helps to disinfect cuts as they're made which has shown to greatly increase frag survival.
All corals are stored during cutting in a small bucket holding water taken directly from their home aquarium. This water is used both to keep them wet as well as for rinsing any flesh away from cuts while I'm working on them.
All finished, and rinsed, frags or trimmed colonies are soaked in Brightwell Aquatics Restor dip to insure that minimal flesh is lost.
Both soak buckets are rinsed and replenished between colonies to reduce the risk of interactions between loose flesh of different coral species.
Notes about Favites:
Favites is one of the corals that will bear significant advantages if corallite boundaries are followed, so when cutting these corals, I always try to follow directly along the top of corallite walls.
As with most LPS corals with encrusting growth, cutting frags as thinly as possible will help to accelerate growth.
If there's a specific species of coral you would like to see fragged, please leave a comment below.
For more LPS Fragging info check out my LPS Fragging Guide:
https://issuu.com/reefhobbyistmagazine/docs/180714044334-e76181af707e4a80912fddc9bf2ffda2/42
Subscribe:
http://www.youtube.com/subscription_center?add_user=mikejrice1
http://www.elitereef.com
https://www.facebook.com/pages/Elite-Reef/233504278468
https://twitter.com/elitereef
http://www.captivecoral.net
http://www.fragging101.wordpress.com
Sent from my SM-G920P using Tapatalk
