FS - 120 tank/stand/canopy

daninflipflops

New member
Changing up my plans and going to be something smaller. I have a 120g glass tank (4'x2'x2') with a black stand and canopy.

The tank has some scratches on the front and side that are visible when empty and a few are still visible when filled with water. These are not hazy areas/scratches on the tank, just the individual scratches. Tried to show that in the pictures. The tank has dual corner overflows. each has a 1" and 3/4" hole. I have the PVC and drain in there setup for a Herbie drains. Seams all look very good, tank does not leak.

The stand is tall, approx 39" from floor to top, and is overbuilt. has been sealed and painted on the inside with left over pool deck paint so its water proof. Will hold about 3" of water before it over flowed. And yes, i tested that :)

The canopy is open on the top and has not had a light installed, so you can install whatever system you want for lighting. I have some leftover wood you can have if you wanted to add a top.

I have 1/2 a can of extra paint if there are ever any touch ups needed. I have door knobs for all the doors, havent installed them, will throw in for free. figured i would leave them off and let the new owner pick out.

Ok, so that was long winded! just trying to be thorough

Asking $700 for the setup

I have some extra items that i might not need since going to smaller tank that i might sell as well, such as a 40B sump with baffles and a 32" LED light with remote/sunrise/sunset/moonphase.

open to trades for 60g Cube or 65g setups
 

Attachments

  • 20170706_195720_resized.jpg
    20170706_195720_resized.jpg
    60.6 KB · Views: 2
  • 20170708_141651_resized.jpg
    20170708_141651_resized.jpg
    34.6 KB · Views: 2
  • 20170711_184847_resized.jpg
    20170711_184847_resized.jpg
    63.4 KB · Views: 2
  • 20170711_184855_resized.jpg
    20170711_184855_resized.jpg
    47.4 KB · Views: 3
  • 20170711_184904_resized.jpg
    20170711_184904_resized.jpg
    43 KB · Views: 3
Last edited:
Back
Top