FS: 225 RR tank, 400w MH's, 1/3 chiller, sump

MPDBullitt

New member
Time to get rid of some of my accumulation...

I have an older (about 10 years) tank..225 gallons. It's 70x24x30tall. Drilled in the back left corner with overflow. Overflow doesn't have slots, it has a channel on top for gutter guard. It still needs more cleaning done on it but i couldn't find a single scratch at all on glass (except bottom) $250

Sump that came with this tank...it's an old wet/dry style but has plenty of room for a skimmer in the middle, setup for external pump $30

old 1/3hp drop in style chiller...fins are rusty but it still works. Needs a controller $100

pair of blueline 400w elec ballasts, pair of brand new batwing reflectors i paid $80 for, and two working bulbs. Look like 14k maybe...purplish. The bulbs work but i have no idea on age. $160

I have a pair of ozone generators and a dryer, one supposedly never used, that I got from another member. $40

I have a blueline 100hd pump, 1,900 gph. It is a beast but it is a little noisy....might need a bearing replaced by an armature shop or something. has 1.5" unions already on it ready to get glued $100

http://www.aquacave.com/Blueline-100-HD-ExternalAquarium-Water-Pump-by-Pan-World-P479.aspx

reply, pm, or for fastest response text @ nine oh one 412 5623

I am trying to get the Reef Octopus xp1000sss that is $340 at memfish for my 90 gallon system. If you are wanting to "buy" things from me and use a credit card we might be able to work something out on that.

Also interested in biopellets - 450ml of dr tims NP Pearls or 500ml Warner Marine ecobak...both are $40 so...

Also plan on getting the BRS 2 part setup with dosers that's $229.99 just in case you have a trade or credit card...
http://www.bulkreefsupply.com/brs-2-part-calcium-alkalinity-total-package-with-dosers.html

Last but not least I'm on need of a couple Koralia evolution 1400's - they run $61 each @ BRS
 
Last edited:
What are the dimensions of the sump? I have a pair of evolution 1400s that I am not currently using with spare caps.
 
Tank is sold and gone....still have everything else so make me an offer!

Carl, the sump is 14x24x15t

I'm going to try and attach two pictures.

not shown in picture is the red drilled tray that used to go above the bioballs, and the lid for the entire sump. I have both.
 

Attachments

  • Sump1.jpg
    Sump1.jpg
    49.9 KB · Views: 4
  • Sump2.jpg
    Sump2.jpg
    56.2 KB · Views: 3
Tank is sold and gone....still have everything else so make me an offer!

Carl, the sump is 14x24x15t

I'm going to try and attach two pictures.

not shown in picture is the red drilled tray that used to go above the bioballs, and the lid for the entire sump. I have both.

Would the below skimmer dimensions work with the sump?
Dimensions: 6" X 4" Footprint (including pump, which is underneath the skimmer), 17.5" Height
 
Alright - I would like to take a look at what you got left. It may be Tuesday before I can. More than anything, I'm interested in the sump. Oh, I can see it all now; the wife (my wife) and me drilling holes in the kitchen counter for a sump. Something had to go on the kitchen counter.... go figure, right?
 
Back
Top