gmate
MASC Member
I am selling this 90g Reef Ready Acrylic Tank, Sump, and Stand. It was purchased from a member of CTARS about three months ago and I never got the chance to set it up. I'm not getting out of the hobby but I have decided that I am most likely no longer interested in this tank. I'd like to do my next tank as a larger vivarium/paludarium with freshwater Cichlids and frogs. In order to feel comfortable siliconing things I'd rather have glass. I am asking for a 90g Glass Tank+Stand (or larger, size isn't an issue - sump and RR is a plus but optional) or 250$ cash. I have this listed at 500$ on Craigslist and have gotten a few bites but nobody totally serious. I posted in the CTARS forum which I know most of you probably browse anyway, but just in case I am going to post here as well. Thank you all for reading!
Glenn
Back brace is removable for easy access to sump as pictured:
It looks dirty but it just needs a vinegar bath. The inside of the acrylic has virtually no scratches (I went over it meticulously, it's in gorgeous shape). I have a bottle of acrylic scratch remover too which I won't need so I will include it. The sump has 2 baffles. Left chamber for water entry, second chamber for skimmer + return pump, third chamber for refuge. Sump is a 20L tank.
The tank itself has a single center acrylic overflow with one line into the sump. The acrylic overflow is removable (it is siliconed in) so if you want to take it off and cap the bulkhead in less than five minutes you can undo the Reef-Ready aspect of this tank. The stand was custom made by Fitch4 from the CTARS board (He runs/organizes the FFM) and the latches are a tad rusty but I'd happily replace them for you at no additional cost if you'd like, I live two blocks from a home depot so it's no sweat.
Glenn
Back brace is removable for easy access to sump as pictured:
It looks dirty but it just needs a vinegar bath. The inside of the acrylic has virtually no scratches (I went over it meticulously, it's in gorgeous shape). I have a bottle of acrylic scratch remover too which I won't need so I will include it. The sump has 2 baffles. Left chamber for water entry, second chamber for skimmer + return pump, third chamber for refuge. Sump is a 20L tank.
The tank itself has a single center acrylic overflow with one line into the sump. The acrylic overflow is removable (it is siliconed in) so if you want to take it off and cap the bulkhead in less than five minutes you can undo the Reef-Ready aspect of this tank. The stand was custom made by Fitch4 from the CTARS board (He runs/organizes the FFM) and the latches are a tad rusty but I'd happily replace them for you at no additional cost if you'd like, I live two blocks from a home depot so it's no sweat.
