FS: Lighting T5 / MH / PC , Skimmer, etc

[bennyinca]

<b>1)</b> Complete T5 with VHO retrofit setup. It is all pre-wired and ready to go.
Basically the same setup as in the $240 setup http://www.reefgeek.com/products/categories/lighting/104071.html , except that this has an icecap 660 ballast, instead of the smaller 430. It also has VHO. The T5s and the VHO run from the same ballast. Comes with:
2 pairs of T5 waterproof endcaps / standoffs
2 60ââ"šÂ¬Ã‚ T5 reflectors (they are actually closer to 58.5ââ"šÂ¬Ã‚)
1 60ââ"šÂ¬Ã…"œ 80W DD actinic bulb
1 60ââ"šÂ¬Ã‚ 80W DD daylight bulb
1 pair VHO waterproof endcap
1 60ââ"šÂ¬Ã‚ 140W VHO actinic bulb
1 Icecap 660 ballast with harness.
<b>$220 obo</b>

<b>2)</b> Complete PC 260W fluorescent retrofit setup. 2 sets of: JBJ remote ballast with built in fans, water proof connectors (4 pin), 10k and actinic bulbs, 65W each. 1 large reflector for the canopy with clips. <b>$100 obo</b>

<b>3)</b> Complete MH 150W DE setup. Comes with ROIII pendant, 14k phoenix bulb, remote icecap e-ballast. <b>$240</b>

<b>4)</b> CPR bakpack2 skimmer. <b>$60 obo </b> http://www.marinedepot.com/md_viewItem.asp?idproduct=CR1111

<b>5)</b> AquaC Remora surface skimmer / prefilter box. This is the one for the remora with mj1200. http://www.marinedepot.com/md_viewItem.asp?idproduct=AC3323
<b> $20 </b>

<b>6) </b> Sedra 3500 skimmer pump with needlewheel impeller. For ASM / Euro Reef skimmers.
One of the suction cup holders is broken, does not affect pump operation. <b>$60 obo </b>
http://www.aquaticwarehouse.com/site/go.cfm/owner/BC7B9537-2664-4C41-BCD702B21FD643D4
http://www.premiumaquatics.com/Merc...de=EURO-ERKSP3500-C-R&Category_Code=Europarts

Some freebies with purchase:
Eclipse hood, 30 inch with lights.
Smaller hoods, 24 inch, NO lighting
Macroalgae
Sand
Located in Lake Forest.

 

[spline9]

Aw man, I wish I could afford that MH unit.
I dont have much but would you accept trades?

 

[bennyinca]

spline9, I sent you a PM

 

[SteveOhh]

Can I use that Sedra 3500 on a ASM Mini G? I'd like to pull more skimmate then I am w/ the GenX 1000???

 

[bennyinca]

<b>sold</b> T5 setup is sold. I end up parting out the T5 bulb/reflectors. If interested, I have the VHO caps / bulbs, and icecap660 ballast available.
<b>sold</b> Complete MH 150W - actually I will end up keeping this for my prop/QT tank.

<b>price drop on these</b>
2) Complete PC 260W fluorescent. $90 obo
4) CPR bakpack2 skimmer $50 obo
5) AquaC Remora surface skimmer $20
6) Sedra 3500 skimmer needlewheel pump $60 obo

 

[bennyinca]

Steve, I have not seen the asm mini to assure it would work, but I think they are standard PVC elbows that connect the pump to the skimmer body, I am pretty sure it can be rigged?
You are more than welcome to take alook a try a dry fit in it.

 

[SteveOhh]

How far south are you in OC??

With gas prices the way they are, I might be better off buying a new one... :lol:

Steve

 

[JenDub]

He's in Irvine =)

 

[SteveOhh]

Ahh not to far south.............

Charles &/or Jen............do you know if that pump will work on my Mini G?

Steve

 

[bennyinca]

Thanks Jen&Charles How are the lil tangs doing?

Steve, I work in the Fountain Valley area near Tongs if that makes it any easier. If it helps, I can look around if any LFS in the area carry the ASM mini, and take a look.

 

[SteveOhh]

YA FV is a little closer to me then Irvine...............

Not many LFS carry the mini, but if ya do find one let mw know either way

Steve

 

[Jar*Head]

Ben, Is the pump still in good shape. I need it for my CS12-1RC as a feed pump. Let me know if is it still available. I WANT IT.

 

[bennyinca]

Steve, it is still available.

 

[Jar*Head]

How old is the pump, do you have any pix?

 

[Jar*Head]

Ben when you said it crack. is it on the bracket or on the body of the pump. Any major damage? I just sent paypal.

 

[bennyinca]

Re: FS: Lighting T5 / MH / PC , Skimmer, etc

<a href=showthread.php?s=&postid=7369654#post7369654 target=_blank>Originally posted</a> by bennyinca
<b>6) </b> Sedra 3500 skimmer pump with needlewheel impeller. For ASM / Euro Reef skimmers.
<b> One of the suction cup holders is broken</b>, does not affect pump operation. <b>$60 obo </b>

It is on the suction cup holder area, in one corner of the bracket.

 

[GTR]

How much for the 660?, you package it, I issue a UPS call tag for it from a day accessible spot UPS can pickup from. How old?

Also, how may endcaps, are they 3 piece and are standoffs included?

Total for all with the same packaging and UPS arrangement.

SteveU

 

[Mchava]

Hey Ben if steve does not take the ballast i will let me know
Mario

 

[GTR]

Mario... he can get it to you easier so that's ok if you move to the front of the line.

SteveU

 

[GTR]

Ben... if you need a buyer give me the price and I'll see. If not... no biggie.

SteveU