Hey folks,
I'm trying to clean up my closets and get out the reef stuff that I 'm not using and don't think I will use in the near future:
I am interested in trading these for:
SPS
Evergrow 120D, it2040, it2080 (+cash)
Dosing machines
live camera like foscam
open minded for other things, no softies though
1. CPR Aquafuge 13"length x4.5" width x 12"height w/ slight defect
2. tunze aqua wind (dual fan for tank)
3. (gone)
4. 1x DJ 8 switch- #2 isn't working the other switches are fine
5. 1 small Kent Doser used for kalk
6. 1 opened bag of NPX Biopellets (I used a bit less than a quarter of the bag
7. Heat sink w/o LEDs- est. 2"x9"
8. Heat Sink w 6 LEDs and some wiring, 2 of them, est. 3"x4" gray, LEDs 3w, blue and white.
9. 20lbs black sand, was used for 1 month of so, already washed.
10. over 100lbs used seafloor grade carib sea sand, needs to be washed (pending)
Fuge:
As you can see, there is a c shaped piece of acrylic missing here. It actually hasn't been used, It's not a big deal it just changes how the water falls into the chamber.
the longer heatsink from when I was thinking about doing a DIY led project
one of the heat sinks with leds and optics
Larger heatsink with LEDs
Biopellets
I'm trying to clean up my closets and get out the reef stuff that I 'm not using and don't think I will use in the near future:
I am interested in trading these for:
SPS
Evergrow 120D, it2040, it2080 (+cash)
Dosing machines
live camera like foscam
open minded for other things, no softies though
1. CPR Aquafuge 13"length x4.5" width x 12"height w/ slight defect
2. tunze aqua wind (dual fan for tank)
3. (gone)
4. 1x DJ 8 switch- #2 isn't working the other switches are fine
5. 1 small Kent Doser used for kalk
6. 1 opened bag of NPX Biopellets (I used a bit less than a quarter of the bag
7. Heat sink w/o LEDs- est. 2"x9"
8. Heat Sink w 6 LEDs and some wiring, 2 of them, est. 3"x4" gray, LEDs 3w, blue and white.
9. 20lbs black sand, was used for 1 month of so, already washed.
10. over 100lbs used seafloor grade carib sea sand, needs to be washed (pending)
Fuge:
As you can see, there is a c shaped piece of acrylic missing here. It actually hasn't been used, It's not a big deal it just changes how the water falls into the chamber.
the longer heatsink from when I was thinking about doing a DIY led project
one of the heat sinks with leds and optics
Larger heatsink with LEDs
Biopellets
