Getting email when the Alarm is not on?

[reefkeeps]

I keep getting emails, a couple a day, even when the alarm is not on... below is the email and my configuration, do I have something setup wrong?

Current Status is:

Sep 06 2005 02:04:07
Temp pH ORP
82.1 8.04 411
VHO is OFF Auto
LMB is OFF Auto
LMH is OFF Auto
SPE is ON Auto
PCL is ON Manual
PDM is OFF Auto
SKM is ON Auto
PM2 is ON Auto
PM3 is ON Auto
OZN is ON Auto
FAN is ON Auto
UV1 is ON Manual
ALM is OFF Auto
2TL is OFF Auto
SH1 is ON Auto
SH2 is ON Auto
SH3 is ON Auto
SH4 is ON Auto
Power Failed: Sep 03 2005 13:57:19
Power Restored: Sep 03 2005 14:13:28





VHO$-C01
LMB$-D01
LMH$-D02
SPE$-D03
PCL#-C03
PDM#-B01
SKM#-C02
PM2#-C04
PM3#-A06
OZN&-B03
FAN&-B02
UV1$-B04
ALM&-A09
2TL&-F02
SH1&-G01
SH2&-G02
SH3&-G03
SH4&-G04


If Time > 00:00 Then ALM OFF
If Time > 00:00 Then SKM ON
If Time > 00:00 Then FAN ON
If Time > 00:00 Then PM3 ON
If Time > 00:00 Then PM2 ON
If Time > 00:00 Then SPE ON
OSC 010/060 ON/OFF Then PDM ON
If Time > 13:30 Then 2TL ON
If Time > 20:30 Then 2TL OFF
If Time > 11:45 Then VHO ON
If Time > 13:30 Then VHO OFF
If Time > 18:00 Then VHO ON
If Time > 20:30 Then VHO OFF
If Time > 13:15 Then LMB ON
If Time > 21:00 Then LMB OFF
If Time > 23:00 Then PCL ON
If Time > 06:00 Then PCL OFF
If Time > 23:10 Then UV1 ON
If Time > 05:30 Then UV1 OFF
If Time > 13:45 Then LMH ON
If Time > 19:45 Then LMH OFF
If Feed cycle Then PM2 OFF
If Feed cycle Then PM3 OFF
If pH > 08.35 Then ALM ON
If pH > 08.37 Then SPE OFF
If pH < 07.85 Then ALM ON
If ORP > 425 Then ALM ON
If Temp < 77.0 Then ALM ON
If Temp < 77.0 Then FAN OFF
If Temp > 83.2 Then ALM ON
If Temp > 83.5 Then PCL OFF
If Temp > 83.5 Then UV1 OFF
If Temp > 84.0 Then VHO OFF
If Temp > 83.0 Then LMH OFF
If Temp > 84.0 Then OZN OFF
If Temp > 84.0 Then LMB OFF
If Temp > 85.0 Then PM2 OFF
If Switch1 OPEN Then SH1 ON
If Switch1 CLOSED Then SH1 OFF
If Switch1 CLOSED Then ALM ON
If Switch1 CLOSED Then SKM OFF
If Switch1 CLOSED Then OZN OFF
If Switch1 CLOSED Then PDM OFF
If Switch1 CLOSED Then SPE OFF
If Switch2 OPEN Then SH2 OFF
If Switch2 CLOSED Then SH2 ON
If Switch2 OPEN Then ALM ON
If Switch2 OPEN Then SKM OFF
If Switch2 OPEN Then OZN OFF
If Switch2 OPEN Then SPE OFF
If Switch3 OPEN Then SH3 ON
If Switch3 CLOSED Then SH3 OFF
If Switch4 OPEN Then SH4 ON
If Switch4 CLOSED Then SH4 OFF
If Switch4 CLOSED Then SKM OFF
If Switch4 CLOSED Then OZN OFF
If Switch4 CLOSED Then PDM OFF
If Switch4 CLOSED Then SPE OFF
If ORP < 390 Then OZN ON
If ORP > 420 Then OZN OFF
If Power Fail Then ALM ON

 

[clp]

I suspect the alarm is active for a short period of time (just a second or two). Perhaps one of the switch is momentarily active?

Curt

 

[reefkeeps]

Do you have a loging fuction built into the rom?

 

[clp]

No events are not logged in the controller. AquaNotes is capable of logging events.

Curt